Planes to clear!

[Janson]

Techone Trenches F3P
condition 8/10
all epp, comes with futaba servos already installed.
required to complete, 10-12A esc, 20g motor, 2s 300mah

Asking for $80.

Lanyu AT6
condition, 7/10 (cracked cowl. now all taped up)
epo construction, selling as airframe only.

dead cheap, only $15

there might be more coming soon. Reason? not enough storage space.
anybody interested can msg me for more details as well as to deal.
82885148
Cheers!~
-Janson

[Janson]

AT6 currently reserved. trenches still availble. =]

[Janson]

Hey all! AT6 sold! Trenches F3P still availble!
I have more planes to clear!

scratch built dlg
its on the heavier side, close to 400g auw, glides really nicely, very straight and balanced.
the wing is fiberglass with a foam core. the pod is balsa covered with monokote.
the boom is 3k carbon fiber tube. comes together with servos, flies on rudder and elevator only.
all control surfaces are on pull-spring setup. the wing is detatchable, held on with two screws, very stiff.
selling for $60, ready to go, just need own rx and receiver batt.

for the last photo, its the yellow plane..

scratch built deceiver pylon racer.
i built this plane just for the fun of scratch building. build liao den scared too fast dun dare to fly.
the plane is fully balsa, very straight and true, comes with 3000kv inrunner brushless motor (the one from jet),
all metal gear servos, alu spinner, and 30amp esc.
i hope to sell this for $200.

Thats all for now.

[Janson]

So a little summary, At6 is sold
Trenches F3P, DLG & deceiver pylon racer now availble.

[Janson]

DLG and Deceiver pylon racer currently reserved!
Trenches F3P still availble!

[Janson]

DLG now sold!
Ups for tranches!! with futaba servos