T E A M
Hi All,
Selling away my beloved collection of planes cos new addition to family coming soon and need the space and cash. So first up is my 3DHS AJ Slick 71" complete electric 8S setup including receiver. I imported this in from the USA in 2011. Built it up in 2012 and flew it about 9-10 times. No crashes still in extremely good condition. Is a pity because shortly after I set it up I stopped flying.
Anyway without further delays the specs are as follows:
1) AJ slicks measure 71" WS x 70" Long with 1012 sq. inches of wing area.
2) The 71" Slick featured a carbon-carbon reinforced landing gear plate assembly with carbon tube fuselage stiffeners and heavy-duty fasteners.
3) The 71" Slick features 3" diameter main wheels.
4) The 71" Slick retains the pre-hinged and gap-sealed ailerons, but the tail hinges are no longer glued to allow them to be changed if desired by the builder (different brand, or do custom work like removable rudder).
5) The 71" Slick electric retains the extra-long hatch and cowl cutout for easy battery placement.
6) Carbon wing tube, carbon main gear, and carbon tail wheel are included.
7) All ball link/phenolic hardware.
My setup:
Powerplant: 4325 - Motrolfly Brushless Motor 4325, 17.95oz
Aileron Servos: HS-7985MG Coreless Digital
Rudder Pull-Pull Setup: HS-7985MG Coreless Digital
Elevator Servo: HS-7985MG Coreless Digital
Castle Creations BEC Pro
Castle Creations ESC
Running off 8s giving killer power.
The plane flies amazing, knife edge, flat spins, you name it.
Will only sell as an entire set including the receiver seen in the pictures, will also give the awesome wingtote wing bag. Asking for $1000.00 nego for serious buyers only. Whatsapp me at 9 three 6 three 6 two nine 4.
PICTURES!!!
See the huge canopy, easy to setup and remove batteries!
Inside the Hatch. Alot of Space for your batteries!
Elevator Servo
Aileron Servo
Plane and Wing Bag
Selling away my beloved collection of planes cos new addition to family coming soon and need the space and cash. So first up is my 3DHS AJ Slick 71" complete electric 8S setup including receiver. I imported this in from the USA in 2011. Built it up in 2012 and flew it about 9-10 times. No crashes still in extremely good condition. Is a pity because shortly after I set it up I stopped flying.
Anyway without further delays the specs are as follows:
1) AJ slicks measure 71" WS x 70" Long with 1012 sq. inches of wing area.
2) The 71" Slick featured a carbon-carbon reinforced landing gear plate assembly with carbon tube fuselage stiffeners and heavy-duty fasteners.
3) The 71" Slick features 3" diameter main wheels.
4) The 71" Slick retains the pre-hinged and gap-sealed ailerons, but the tail hinges are no longer glued to allow them to be changed if desired by the builder (different brand, or do custom work like removable rudder).
5) The 71" Slick electric retains the extra-long hatch and cowl cutout for easy battery placement.
6) Carbon wing tube, carbon main gear, and carbon tail wheel are included.
7) All ball link/phenolic hardware.
My setup:
Powerplant: 4325 - Motrolfly Brushless Motor 4325, 17.95oz
Aileron Servos: HS-7985MG Coreless Digital
Rudder Pull-Pull Setup: HS-7985MG Coreless Digital
Elevator Servo: HS-7985MG Coreless Digital
Castle Creations BEC Pro
Castle Creations ESC
Running off 8s giving killer power.
The plane flies amazing, knife edge, flat spins, you name it.
Will only sell as an entire set including the receiver seen in the pictures, will also give the awesome wingtote wing bag. Asking for $1000.00 nego for serious buyers only. Whatsapp me at 9 three 6 three 6 two nine 4.
PICTURES!!!
See the huge canopy, easy to setup and remove batteries!
Inside the Hatch. Alot of Space for your batteries!
Elevator Servo
Aileron Servo
Plane and Wing Bag
Comment