Esky King 2 almost full METAL KIT - $90
Esky Alum
-Swash
-Washout
-Tail gearbox
-Tail Blade Clamp
Xtreme Products
-Anti rotation bracket
-Landing Skid
-Battery mount
-Motor mount
-Belt and Pulley
Imax Compact Charger - $20 ( condition very good 10/10! )
-PSU is attached to charger, just plug in the wall and charge!
-Reason of selling = 650ma /hr is too slow for me..
FirstPower 12V 7.2A nicd battery (bought second hand)
-Going for $10
-Wanted to use for charging at field but found it too heavy to bring out.
15Minute Epoxy Glue
-Going about $7
-With box
-About 3/4 Left
-Reason for selling = got 5min epoxy instead.
AVIATION 1000MA 3s 20C battery.
-Going for $20
-About 4 cycles
-Selling due to no use of it.
Heli Training Kit
-Going for $5
-Reason for selling = Not using anymore
-suitiable for mini t /belt cp/ king 2 / trex 450
-Cable Ties cn be given upon request
GWS 10x6 Orange Propeller
-Going for $1.50 each.
-Have 5
-Reason for selling = hole too small and lazy to make bigger. ordered from Hobby-City
Ripper Brushless Motor OBL 2924/11
-GWS Alum. Brushless Motor Mount 28mm given
-Selling cause quit plane..
-going for $50
HS56HB servo. only 1 arm. spares lost. - $20
Esky Alum
-Swash
-Washout
-Tail gearbox
-Tail Blade Clamp
Xtreme Products
-Anti rotation bracket
-Landing Skid
-Battery mount
-Motor mount
-Belt and Pulley
Imax Compact Charger - $20 ( condition very good 10/10! )
-PSU is attached to charger, just plug in the wall and charge!
-Reason of selling = 650ma /hr is too slow for me..
FirstPower 12V 7.2A nicd battery (bought second hand)
-Going for $10
-Wanted to use for charging at field but found it too heavy to bring out.
15Minute Epoxy Glue
-Going about $7
-With box
-About 3/4 Left
-Reason for selling = got 5min epoxy instead.
AVIATION 1000MA 3s 20C battery.
-Going for $20
-About 4 cycles
-Selling due to no use of it.
Heli Training Kit
-Going for $5
-Reason for selling = Not using anymore
-suitiable for mini t /belt cp/ king 2 / trex 450
-Cable Ties cn be given upon request
GWS 10x6 Orange Propeller
-Going for $1.50 each.
-Have 5
-Reason for selling = hole too small and lazy to make bigger. ordered from Hobby-City
Ripper Brushless Motor OBL 2924/11
-GWS Alum. Brushless Motor Mount 28mm given
-Selling cause quit plane..
-going for $50
HS56HB servo. only 1 arm. spares lost. - $20