Hi All,
I'm not exactly sure how to term the problem properly... so here goes.
Before binding, I would hear a beeping at a interval of maybe 1s. Once the tx and rx locked on, the beeping will stop and all control surface functions normally. As per normal practise I would do my checks and then launch. 3~5s later, I just loose all control and down goes my plane. Walking to recover the plane, I could here that beeping sound that I usually have before the tx/rx is bound. Moving closer to the plane The beeping stops and functions are back to normal. Final checks and launch again, not even 5m away, all control is lost.
This time, I tried walking away while leaving the plane on the ground for maybe about 15m... no problem. So... range doesn't seem to be the problem... but then again I could be wrong. This is the 2nd 8ch rx I tried with similar results.
Oh... and another thing, I also tried on the 4ch rx, I don't have any 'comm lost' issue.
Anybody got any idea?
I'm not exactly sure how to term the problem properly... so here goes.
Before binding, I would hear a beeping at a interval of maybe 1s. Once the tx and rx locked on, the beeping will stop and all control surface functions normally. As per normal practise I would do my checks and then launch. 3~5s later, I just loose all control and down goes my plane. Walking to recover the plane, I could here that beeping sound that I usually have before the tx/rx is bound. Moving closer to the plane The beeping stops and functions are back to normal. Final checks and launch again, not even 5m away, all control is lost.
This time, I tried walking away while leaving the plane on the ground for maybe about 15m... no problem. So... range doesn't seem to be the problem... but then again I could be wrong. This is the 2nd 8ch rx I tried with similar results.
Oh... and another thing, I also tried on the 4ch rx, I don't have any 'comm lost' issue.
Anybody got any idea?