T E A M
Hi, like to share my rebuilt Compy300 - its a great flyer now for me 
Was flying stock plastic frame for a while on 3S1P 1300 mAH lipo. Went ahead recently with the Fibre Frame upgrade, mod with boom support strut, DIY Gyro holder, added fibre plate to support TP2100 15C lipo (145gm - perfect balance) and running with HS-45HB cyclic servo, HS-50 tail servo and Align RCE-BL35G ESC (left over from an upgraded TREX SE). Other than that, the rest are stock parts.
Fly really well (only sports filying for me) and after 7mins, have to pump back only 1000 mAH. Tried using the 1300 mAH lipo but performance somehow is poor (I suspect the heli is drawing more than the 1300 mAH can supply) - after 3 minutes, the 1300 mAH lipo can't maintain HS.
AUW is 537gm with lipo and 394 gm without - quick heavey for a 300 size but good as a yard flyer.
My next project is to rebuild my Hornet X3D
Was flying stock plastic frame for a while on 3S1P 1300 mAH lipo. Went ahead recently with the Fibre Frame upgrade, mod with boom support strut, DIY Gyro holder, added fibre plate to support TP2100 15C lipo (145gm - perfect balance) and running with HS-45HB cyclic servo, HS-50 tail servo and Align RCE-BL35G ESC (left over from an upgraded TREX SE). Other than that, the rest are stock parts.
Fly really well (only sports filying for me) and after 7mins, have to pump back only 1000 mAH. Tried using the 1300 mAH lipo but performance somehow is poor (I suspect the heli is drawing more than the 1300 mAH can supply) - after 3 minutes, the 1300 mAH lipo can't maintain HS.
AUW is 537gm with lipo and 394 gm without - quick heavey for a 300 size but good as a yard flyer.
My next project is to rebuild my Hornet X3D