T E A M
Ok..just did the maiden....man it was #@!*ing hairy...good news is the plane landed safely without a scratch
The problem was...i had a good 2 sec delay on my control input! This plane has tailerons...i'm using an E-sky servo on each elevator..should be strong enough rite?
The same proven electronics taken from another plane..which was glitch free..seems to be a problem in this one.
Speed control: HobbyWing 30amps
3 E-sky servos
Hs-81mg for sweep
Receiver: Airtechnics
Power cables from esc to motor are twisted and wrapped in foil!
Amp draw abt 20amps
My F-15, using a Hitec HFS-06MT..but all Gws bb servos is glitch free.
Any suggestions or feedback greatly appreciated.
Cheers.