Hi guys, I am selling my seldom used and much loved ModelTech Magic 3D funfly aeroplane. I built this plane from the ARF kit, and have flown it 3 times (yes, 3 times in 5 years, that's what having kids will do to this hobby). The last of those 3 times was in 2010...so you can understand why I am selling it.
It's a great flyer, perfect for 3D and general fun flying. The plane comes with quite a lot, so let me try and be as specific as possible :
Airframe :
* It's got a one-piece wing, bolt-on with elastic band fastening
* servo trays installed
* push rods installed
* fuel tank installed
* landing gear & wheels installed (one crack on the mounts from a hard landing, please see pic)
* there was a small puncture hole on the bottom of the wing which I have repaired, please see pic
Servo's
* 4 x HiTec high torque HS-5625MG (metal gear servos, fast & very responsive, great for 3D flying, see this link : http://www.servodatabase.com/servo/hitec/hs-5625mg). 2 of these are mounted "in-wing", please see pic
* 1 x Futaba S3010 "normal" servo for throttle
Engine
* 1 x OS 46 MAX. I have owned this engine since new and ran it in myself, it is incredibly reliable, has never let me down. The work-horse of the OS engine family, and perfect for this plane.
Please note there is no Tx or Rx included with this plane.
Pricing for everything is $250 all in. It can be viewed / collected at my place near Fort Rd (East Coast).
Separate pricing for the items is as follows :
Airframe : $90
Servos (sold together - all 5 as a bundle) : $100
Engine : $80
If you are interested please sms or call me at 92985580 (Andre). Thanks for looking !
It's a great flyer, perfect for 3D and general fun flying. The plane comes with quite a lot, so let me try and be as specific as possible :
Airframe :
* It's got a one-piece wing, bolt-on with elastic band fastening
* servo trays installed
* push rods installed
* fuel tank installed
* landing gear & wheels installed (one crack on the mounts from a hard landing, please see pic)
* there was a small puncture hole on the bottom of the wing which I have repaired, please see pic
Servo's
* 4 x HiTec high torque HS-5625MG (metal gear servos, fast & very responsive, great for 3D flying, see this link : http://www.servodatabase.com/servo/hitec/hs-5625mg). 2 of these are mounted "in-wing", please see pic
* 1 x Futaba S3010 "normal" servo for throttle
Engine
* 1 x OS 46 MAX. I have owned this engine since new and ran it in myself, it is incredibly reliable, has never let me down. The work-horse of the OS engine family, and perfect for this plane.
Please note there is no Tx or Rx included with this plane.
Pricing for everything is $250 all in. It can be viewed / collected at my place near Fort Rd (East Coast).
Separate pricing for the items is as follows :
Airframe : $90
Servos (sold together - all 5 as a bundle) : $100
Engine : $80
If you are interested please sms or call me at 92985580 (Andre). Thanks for looking !
Comment