I have the following to sell, please tell me what do you want and give me a reasonable offer and is yours:
Note that the KongCopter 450 above is selling in a set with the following electronics and parts:
1 X-CAM KongCopter 450 Frame Kit
2 APM Flight Controller Set APM 2.6 & 6M GPS & OSD & Radio Telemetry etc
3 4 x SunnySky X2216 1100KV Brushless Motor For RC Airplane Quadcopter
4 4 x 10x5 Carbon Fiber CW/CCW Props For RC Models
5 APM 2.6 2.5 2.52 Power Module With 5.3V DC BEC
6 KongCopter LED Light System (For 450 to 800 Size )
7 4 x hobbywing platinum pro 30a ESC
8 APM 2.5 APM 2.6 Digital / OSD Telemetry Y Type Cable
9 Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware) Coverted with LED White Lighting + Turnigy 2650mAh 3S 1C Lipoly Tx Pack (Futaba/JR)
10
Looking at min $1200 for the above plus the following free gift:
1 X-CAM KongCopter 450 Carbon Fiber Body
2 X-CAM KongCopter 450 Carbon Fiber Arm Kit
3 Turnigy 5000mAh 4S 25C Lipo Pack
4 Turnigy nano-tech 6000mah 4S 25~50C Lipo Pack
5 GT Power Intelligent Battery Manager
6 Turnigy 9X 9Ch Transmitter Bag
7 GT Power Capacity Controller
8 Some X-CAM KongCopter 450 Spare parts
Others to sell seperately, please tell me what do you want and give me a reasonable offer and is yours:
1 Emax Brushless 25A SimonK 4-in-1 Quadcopter ESC Built-in UBEC
2 X-CAM A10-3H for GOPRO 3 Axis Gimbal
Please call Eric @ 97401664 to get them now before is gone...
Thanks.
Note that the KongCopter 450 above is selling in a set with the following electronics and parts:
1 X-CAM KongCopter 450 Frame Kit
2 APM Flight Controller Set APM 2.6 & 6M GPS & OSD & Radio Telemetry etc
3 4 x SunnySky X2216 1100KV Brushless Motor For RC Airplane Quadcopter
4 4 x 10x5 Carbon Fiber CW/CCW Props For RC Models
5 APM 2.6 2.5 2.52 Power Module With 5.3V DC BEC
6 KongCopter LED Light System (For 450 to 800 Size )
7 4 x hobbywing platinum pro 30a ESC
8 APM 2.5 APM 2.6 Digital / OSD Telemetry Y Type Cable
9 Turnigy 9X 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) (v2 Firmware) Coverted with LED White Lighting + Turnigy 2650mAh 3S 1C Lipoly Tx Pack (Futaba/JR)
10
Looking at min $1200 for the above plus the following free gift:
1 X-CAM KongCopter 450 Carbon Fiber Body
2 X-CAM KongCopter 450 Carbon Fiber Arm Kit
3 Turnigy 5000mAh 4S 25C Lipo Pack
4 Turnigy nano-tech 6000mah 4S 25~50C Lipo Pack
5 GT Power Intelligent Battery Manager
6 Turnigy 9X 9Ch Transmitter Bag
7 GT Power Capacity Controller
8 Some X-CAM KongCopter 450 Spare parts
Others to sell seperately, please tell me what do you want and give me a reasonable offer and is yours:
1 Emax Brushless 25A SimonK 4-in-1 Quadcopter ESC Built-in UBEC
2 X-CAM A10-3H for GOPRO 3 Axis Gimbal
Please call Eric @ 97401664 to get them now before is gone...
Thanks.