New inventories coming in so thinking of clearing my PA Katana MX Yellow colour.
Plane followed faithfully all recomended PA setup specs as close as possible.
Meticulously built (has built 3 PA planes so far)
Thrust motor
Quantum ESC 70 amp
Xoar High End Wooden Prop
Carbon Spinner
Optional Carbon Vortex Generatorn and carbon Shark Fins installed
Optional extended carbon Servo arms
Condition 8.5/10 as some minor dings by transport accident but are mended. Other than that it flies on rails and hovers easily due to its amazing power to weight ratio 3 to 1. It also takes off real easy on grass due to its extreme light weightiness. Approx 6-8 flights done. Can do flight demo on request.
You need to add your RX and lipo to fly (3s 2200 x 2 or 6s 2200 mah)
Specs:
ASK $580.
Note: Plane comes with 4 x Hitec Digital metal servos Hitec HS5085MG worth approx $150, motor and esc approx $300, not mentioning prop, prop adapter, carbon spinner, extended servo arms and vortex generators and carbon shark fins and upgraded size landing wheels all bought seperately . Just buying a brand new airframe alone costs $425
Collect at Suntec Tower 2 during office hours or adam road hawker center after 7pm.
Reach me at 91425689 (SMS only) for any query thanks
Will Load Photos shortly.
Plane followed faithfully all recomended PA setup specs as close as possible.
Meticulously built (has built 3 PA planes so far)
Thrust motor
Quantum ESC 70 amp
Xoar High End Wooden Prop
Carbon Spinner
Optional Carbon Vortex Generatorn and carbon Shark Fins installed
Optional extended carbon Servo arms
Condition 8.5/10 as some minor dings by transport accident but are mended. Other than that it flies on rails and hovers easily due to its amazing power to weight ratio 3 to 1. It also takes off real easy on grass due to its extreme light weightiness. Approx 6-8 flights done. Can do flight demo on request.
You need to add your RX and lipo to fly (3s 2200 x 2 or 6s 2200 mah)
Specs:
ASK $580.
Note: Plane comes with 4 x Hitec Digital metal servos Hitec HS5085MG worth approx $150, motor and esc approx $300, not mentioning prop, prop adapter, carbon spinner, extended servo arms and vortex generators and carbon shark fins and upgraded size landing wheels all bought seperately . Just buying a brand new airframe alone costs $425
Collect at Suntec Tower 2 during office hours or adam road hawker center after 7pm.
Reach me at 91425689 (SMS only) for any query thanks
Will Load Photos shortly.
Comment