WTS 25 size Spitfire and motors

[oldmanflying]

RC Smart Xspeed 4890 inrunner motor




Spec:
Rotational Speed: 4890 RPM/V
Continuous Current: 20A
Max. Current: 25A
Input Voltage: 6 - 18V
Max. Efficiency: 98%
No Load Current: 0.8A
Internal Resistance: 86m ohm
Motor Dimensions (Diameter x Length): 20mm x 39mm
Shaft Dimensions (Diameter x Length): 2.3mm x 10mm
Input Battery Types: NiCd/ Nimh/ Li-po Battery
Recommend Model: Helicopter

Selling @ $20




Turnigy SK3 3542-1250kv brushless outrunner motor



Specs:
Turns: 10T
Voltage: 3~4S Lipoly
RPM/V: 1250kv
Internal resistance: 0.022Ohm
Max Loading: 54A
Max Power: 755W
Shaft Dia: 5.0mm
Bolt holes: 25mm
Bolt thread: M3
Weight: 141g
Motor Plug: 3.5mm Bullet Connector

Selling @ $50




25 size Spitfire (this is the older model, without retracts. Comes with 1 x spare wings)


* Sorry that I have not got a chance to take pictures of the original bird, the update pictures will be up soon. Picture from HK website as reference *

Specs:
Wingspan: 1234mm
Length: 1045mm
Wing Area: 25.8dm2
Dry Weight: 512g
4 Channel (aileron, elevator, rudder, throttle)

Requires:
Your Own 5~6 Channel TX/RX
4x 17g Servo, 1 x low profile retract servo
36mm Brushless Motor 300w~400w
3300mAh 3s Lipoly Battery (EP)
40A ESC w/BEC (EP)

Selling $150

PM or contact me (eight one zero zero three eight six zero)

Deal at Defu or East side during office hours, any other location please arrange with me prior to meet up.

[oldmanflying]

As mentioned...







There are holes cut out on the cowling and a small damage. Going to give her an engine but didn't have time to procced further.

[oldmanflying]

UPzzz for the long-weekend...

[oldmanflying]

bump...

[oldmanflying]

Still available
up...