1) techone venus. 1 flight only and crashed radio probs. No major damage. Its epp.
All servos in and esc. Pullpull rudder. Aileron changed to better servo.
Buyer gets new tiger motor for venus. Bnip. Motor costs $40 esc included.
Selling at $90 firm. Free 2x 2s batts tats for the venus.
2) 1.8m passer x upgraded motor. Yellow. Pnp. All in. $80
3) freewing syracuz f16. 70mm pnp. Thrust vector 360 deg.
Has 7 servos. Cond.8/10 never maiden. Wing tip broke off abit and elevator due to mishandling.
Elevator came out at hinge lining so no cosmetic damage. Jus need to ca the parts.
$120
4) guanli p47. Kit with servos. Nib. Will throw in esc for then plane.
$80
5) new handlaunched glider blue. Bug e fun. Wanted to convert to ep but no time.
Will include a 2s motor and 12a esc. $30
6) feiyutech fy20a flight stabiliser $80
7) aeorc p1 wattmeter battchecker. Nib with case. $30
8) faulty jr 9x2. The batt pcb board needs resoldering. Mainboard is still in good condition.
Ive got a 2nd set 9x2 tats how i checked. Selling to those who needs the parts or who can
Do a simple repair. Fyi. Jr 9x2 parts are hard to come by and expensive if need to send to the
MCGREGOR factory. $100
Sms 91799191.
All servos in and esc. Pullpull rudder. Aileron changed to better servo.
Buyer gets new tiger motor for venus. Bnip. Motor costs $40 esc included.
Selling at $90 firm. Free 2x 2s batts tats for the venus.
2) 1.8m passer x upgraded motor. Yellow. Pnp. All in. $80
3) freewing syracuz f16. 70mm pnp. Thrust vector 360 deg.
Has 7 servos. Cond.8/10 never maiden. Wing tip broke off abit and elevator due to mishandling.
Elevator came out at hinge lining so no cosmetic damage. Jus need to ca the parts.
$120
4) guanli p47. Kit with servos. Nib. Will throw in esc for then plane.
$80
5) new handlaunched glider blue. Bug e fun. Wanted to convert to ep but no time.
Will include a 2s motor and 12a esc. $30
6) feiyutech fy20a flight stabiliser $80
7) aeorc p1 wattmeter battchecker. Nib with case. $30
8) faulty jr 9x2. The batt pcb board needs resoldering. Mainboard is still in good condition.
Ive got a 2nd set 9x2 tats how i checked. Selling to those who needs the parts or who can
Do a simple repair. Fyi. Jr 9x2 parts are hard to come by and expensive if need to send to the
MCGREGOR factory. $100
Sms 91799191.
Comment