T E A M
Need some advice. I am thinking of putting a rate gyro for aileron on my thunderbat pusher plane. Just mod the plane to become like a multiplex microject. Now plane comes with 2 servos for aileron and elevator control (Elevon).
When i try to connect the rate gyro to CH1, when i turn one side of the plane; only the right side of the aileron moves up and down corresponding to the roll movement of the plane. Why is the left aileron not moving? Gain is set at 50% and gyro is correctly placed.
Appreciate your advice. Thks.
When i try to connect the rate gyro to CH1, when i turn one side of the plane; only the right side of the aileron moves up and down corresponding to the roll movement of the plane. Why is the left aileron not moving? Gain is set at 50% and gyro is correctly placed.
Appreciate your advice. Thks.