WTS: JR Voyager E & Brushless setup

[9VDXN]

Intending to sell my JR Voyager E, complete setup without RX, or open to any configurations.


Here's the details:

Voyager E Kit (JR Fibreglass blade & woodies included. MS composite blade option)
Hitec HS-225MG cyclic servos
GY401 & 9253 (might include a 9254 instead if i'm lazy to change over)
Cyclone Heli4000 BL motor
Hacker Master heli 40amps ESC (CC45 ESC config available too)

Will include 2 packs of 3s2P lipo for avg of 12mins flight each.
PLENTY of spares available, but details to be confirmed.


Will only consider any offers above $1k for ARTF setup...
I'm not quoting final prices as I've yet to sort out the value & availability of my spares & some upgrade parts.

[9VDXN]

Here's my list of spares available at this very moment, but some might be reserved for another friend who flies VE...

NEW IN PACKAGE

2x 440mm Wooden blades - 83060
1x Tail boom - 83058
2x Flybar - 83057
1x Tail control rod - 83059
1x 16T pinion gear - 70262
1x 14T pinion gear - 70260
1x main shaft collar - 70250
1x canopy (transparent part) - ??????
1x Landing skid set - 82151
2x spindle shaft damper - 60643
2x linkage sets - 70006 & 70004
1x washout base - 60641
1x canopy mount rubber - 80144
2x tail control arm - 60653
2x mainshaft - 60644
1x motor mount - 60660
1x drive belt - 60654
4x bearing block for gears - 81042
2x mainshaft bearing block - 81040
2x main gear set - 60645
2x secondary stage gear - 60656
1x washout arm set - 70247
2x flybar control arm - 60638
1x tail rotor shaft - 70254
2x Rubber gromettes - 60072
1x screws for boom shaft - 60660
1x Extended tail blades - 60697
3x tail slider ring - 60649
1x tail case - 60651
3x T-Hub - 60636
3x main blade grips - 60634
2x normal tail blades - 60646

USED SPARES

Metal blade grips
Metal T-hub

[9VDXN]

bump.

[9VDXN]

1x Landing skid set - 82151 *SOLD*

1 pack lipo cell *SOLD*

The rest still available, open to reasonable offers above $1k for ARF setup, or open to any configs request.

[NIMH]

bump for friends

[9VDXN]

hehehe, thanks....

[9VDXN]

Bump

[MicroHeli-Nut]

Sorry to hear you're selling it away....

Hope this smooth bird can find a good owner....

BUMP x1 for the goodness that it was...

[9VDXN]

No need to be sorry for it..

This wonderful heli served it's purpose for me, and I'm intending to move on to try 30/50size ep bird...so only if this bird is gone, I can get one more....else no space liao...


Thanks for the bump..

[9VDXN]

bump for the Xmas.

[9VDXN]

Bump with special price for the ARTF heli, all upgrades, MS Composit blades, and ALL SPARES u see in the picts. PM for price if keen.

Thanks.

[9VDXN]

bump

[Heli Lim]

Jr Ve

Friend you go to get E Rappy

[9VDXN]

no lar, too many helis liao must get rid first. but am seriously thinking of large ep helis of 30 or 50 size.

[9VDXN]

bump.

Any offers of $1k and above secures. Everything, except RX & TX included, plug, trim and fly. Will include a Apache lipo charger for the 3S2P pack as well.

Must go...