T E A M
Bit of a sad day but have decided to part company with my Flasher500 ESP due to lack of time to fly. Purchased from Pang@heliguru back in October 2009.
The flasher has flown EIGHT (yes eight!!!!) times only. It is in brand spanking new condition - 10/10. The servos, ESC, motor and batteries are also only 8 flights old and were purchased brand new for the Flasher.
She flies beautifully - very very stable. A lot of time and attention was put into the build, with a complete tear down and re-assemble from the original kit. Put it together over 3 weeks so really took my time with the build. Main gear, autorotation gear and main mast have been swapped out with original align parts as per most people's recommendations.
What you get
Flasher 500 ESP Full Carbon Fibre inc. torque tube
Carbon fibre main blades
Hobby Wing Pentium-60A ESC
ICECold 500R1700TF
3x SAVOX SH-1350 digital cyclic servos
1x SAVOX SH-1357 digital tail servo
2 x Flightmax 2650 6S1P 20C with only four cycles each
Futaba GY401 Gyro
Spektrum AR7000 2.Ghz RX
What else do you need to fly this kit? Absolutely nothing - just bind your TX and you are ready to fly.
Pictures are here http://picasaweb.google.com/spaamforsam/Flasher500
Cost to me for this project was $1,250.
Willing to let go for $875. A good deal I think for what is basically a brand new kit with new electronics.
The flasher has flown EIGHT (yes eight!!!!) times only. It is in brand spanking new condition - 10/10. The servos, ESC, motor and batteries are also only 8 flights old and were purchased brand new for the Flasher.
She flies beautifully - very very stable. A lot of time and attention was put into the build, with a complete tear down and re-assemble from the original kit. Put it together over 3 weeks so really took my time with the build. Main gear, autorotation gear and main mast have been swapped out with original align parts as per most people's recommendations.
What you get
Flasher 500 ESP Full Carbon Fibre inc. torque tube
Carbon fibre main blades
Hobby Wing Pentium-60A ESC
ICECold 500R1700TF
3x SAVOX SH-1350 digital cyclic servos
1x SAVOX SH-1357 digital tail servo
2 x Flightmax 2650 6S1P 20C with only four cycles each
Futaba GY401 Gyro
Spektrum AR7000 2.Ghz RX
What else do you need to fly this kit? Absolutely nothing - just bind your TX and you are ready to fly.
Pictures are here http://picasaweb.google.com/spaamforsam/Flasher500
Cost to me for this project was $1,250.
Willing to let go for $875. A good deal I think for what is basically a brand new kit with new electronics.
Comment