Announcement

Collapse
No announcement yet.

Building PT Torpedo Boat

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Building PT Torpedo Boat

    Sadly, there are very few of these noble craft left. After the war, many of them were stripped and burned. Fortunately, a few that were still in the U.S. were not destroyed. Some made their way into use as private vessels. Others were kept by the Navy.


    For Sale

    CSM ICG400 Heading Lock Gyro+ ($160)
    (

    #2
    The Patrol Torpedo Boat was a wooden craft, about 80 feet long and displacing about 55 tons. It was powered by 3x Packard Marine engines that developed close to 1,500 horsepower each. The boats carried 3,000 gallons of 100 octane aviation fuel for power. They could accelerate from 8 to 40 knots in about eleven seconds, with a top speed of about 48 knots. As far as armament goes, you couldn't come near one without having something lethal pointed in your direction. The PT Boat carried more firepower per pound than any other craft in the Navy. Dont play play ah..

    The typical boat carried most of the following:

    i. 40 mm Bofors cannon, aft.
    ii. Twin 50 cal. machine guns port and starboard
    iii. 20 mm Oerlikon forward
    iv. 37 mm Automatic forward
    v. 4 MK VIII torpedoes in tubes, later boats had 4 MK XIII torpedoes on racks
    vi. Depth Charges
    vii. Mortar
    viii. Rockets
    ix. Smoke Generator
    x. Small Arms
    xi. Hand Grenades

    The crew consisted of about 14 men, 1 or 2 of them officers. What made the all-volunteer crew different was the breadth of their training. While the crew members on a typical ship were trained in a specialty, and there were several crew members trained in the same job. The crew of a PT was trained to do every job on the boat, with one or two being their specialty. They didn't have the luxury of replacements, so everyone had to know everyone elses job.


    For Sale

    CSM ICG400 Heading Lock Gyro+ ($160)
    (

    Comment


      #3
      One PT boat recovered for restoration.


      For Sale

      CSM ICG400 Heading Lock Gyro+ ($160)
      (

      Comment


        #4
        Mass production .....but not for RC


        For Sale

        CSM ICG400 Heading Lock Gyro+ ($160)
        (

        Comment


          #5
          Who say we have to build things in the right scale?....


          For Sale

          CSM ICG400 Heading Lock Gyro+ ($160)
          (

          Comment


            #6
            There were many classes of the torpedo boat, the PT103 class (ELCO 80) is the one I will be building. The famous PT109, which JFK took command was a PT103 class. PT109 was sunk by japanese destoryer Amagiri.


            For Sale

            CSM ICG400 Heading Lock Gyro+ ($160)
            (

            Comment


              #7
              Originally posted by stuka
              There were many classes of the torpedo boat, the PT103 class (ELCO 80) is the one I will be building. The famous PT109, which JFK took command was a PT103 class. PT109 was sunk by japanese destoryer Amagiri.
              Haha.. another boatz? I think shouldn't be a prob to you..

              Comment


                #8
                wah .... cannot stop building one. Stuka "walk fire enter devil" already

                Comment


                  #9
                  ...always wanted to build a twin-motor, this will be the one..

                  Just finished preparing the patterns.


                  For Sale

                  CSM ICG400 Heading Lock Gyro+ ($160)
                  (

                  Comment


                    #10
                    The model I am building will be 40 inch in length and 14" wide, i.e. about 1/24 scale. 9" longer and approx 6" wider than the Villian EX.


                    For Sale

                    CSM ICG400 Heading Lock Gyro+ ($160)
                    (

                    Comment


                      #11
                      Originally posted by stuka
                      ...always wanted to build a twin-motor, this will be the one..

                      Just finished preparing the patterns.
                      wa.. how do you make those drawings?? Can teach me?? Its so nice and professional.. you should start a Stuka AquaModel Class!!

                      Comment


                        #12
                        Originally posted by Richard
                        wa.. how do you make those drawings?? Can teach me?? Its so nice and professional.. you should start a Stuka AquaModel Class!!
                        Drawings? Wish I know how to do that too.. I use photoshop to resize the plan then use printer to print.. .

                        For Sale

                        CSM ICG400 Heading Lock Gyro+ ($160)
                        (

                        Comment


                          #13
                          Originally posted by stuka
                          Drawings? Wish I know how to do that too.. I use photoshop to resize the plan then use printer to print.. .
                          Problem here I oso have some side view drawings of the boats I like but they do not have the bulkhead dimensions, so its hard to imagine and draw from there. If you got the bulkhead drawing like that.. where do you get those?

                          Comment


                            #14
                            here goes stuka again..the master....stuka...i think you can start a production line liao....
                            Heli
                            * OS46- ... and doing simple figure 8 and nose in... want to venture to loops...
                            Thanks to all old birds from Daddyhobby
                            Car
                            *
                            *
                            *
                            *Hyper 8 RTR
                            Tank
                            *HenLong M1A1
                            Mini Monster Truck
                            *

                            Comment


                              #15
                              Originally posted by eleewhm
                              here goes stuka again..the master....stuka...i think you can start a production line liao....
                              ...this hobby is addictive..

                              For Sale

                              CSM ICG400 Heading Lock Gyro+ ($160)
                              (

                              Comment

                              Working...
                              X