screw up pilot

[azeman]

Bro... just fly D edf plane...this my first fly on edf plane F/15...it`s nice to fly but landing time woo....wooo.ooo..!very scary... & my F/ 5...woo... fast ..& landing nose down.. I lost one of D [ELE.. servo..].
Anyone can help me for this figure:[ how to get 2 servo going same direct in Y connecter...for elevator.?].

thank`s to KENNYSEAW to give me chance to fly EDF PLANE.
THANK YOU AGAIN /Hope we can fly together & learn some skill from U.BEST SELLER..

[jansonfinn]

Anyone can help me for this figure:[ how to get 2 servo going same direct in Y connecter...for elevator.?].

Install 1 of the servos in the opposite direction

[azeman]

Install 1 of the servos in the opposite direction

bro.. i did it but servo get burn & now I lost another servo... total 2 servo out...!

[WOLFMAN]

why use Y connector when u can connect it to 2 points and mix the controls if the wire to short get a servo extension

[jansonfinn]

bro.. i did it but servo get burn & now I lost another servo... total 2 servo out...!

got burnt? I meant the servo position, not the servo connector.
Btw how come ur F-15 needs 2 servos for the elevator?

[azeman]

got burnt? I meant the servo position, not the servo connector.
Btw how come ur F-15 needs 2 servos for the elevator?

yes.. its my both edf plane using 2 servo on elevator.. F/15&F/5..

[azeman]

why use Y connector when u can connect it to 2 points and mix the controls if the wire to short get a servo extension

YES ..bro i`m using 9chp mix control only on AIL.. but not on ELE.. TRY TO SETUP ..but can`t ... edf plane stock came on 2 servo for elevator...

[Vortices]

hi, can I ask what make is the f-15 in question.

[azeman]

screw up pilot

hi, can I ask what make is the f-15 in question.

ok... bro..D question? how to get D 2 servo..for D elevator...going in D SAME DIRECTION ....in Y CONNECTOR...It on my F/5.. but is same concept to D F/15... THANK bro....

[frankielee35]

ok... bro..D question? how to get D 2 servo..for D elevator...going in D SAME DIRECTION ....in Y CONNECTOR...It on my F/5.. but is same concept to D F/15... THANK bro....

Resolder the wire @ the motor.
Cheers.

[romihensem]

hmmm

pardon my poor drawings but this in the only way that i can think off if u r using y cable for elevator. or u can try to program mix master channel 2 and slave channel 6 to make it go the same way. make necessary changes to % input eg -/+ to...

[Vortices]

hi, can I ask what make is the f-15 in question.

I mean what brand is it?

To convert a normal servo to a reverse servo, you need to reverse solder the servo motor wires and the potential meter wires.

cheers.

[VinCopter]

YES ..bro i`m using 9chp mix control only on AIL.. but not on ELE.. TRY TO SETUP ..but can`t ... edf plane stock came on 2 servo for elevator...

The radio should be able to setup “Dual Elevator Servos”, look up the manual.

[azeman]

I mean what brand is it?

To convert a normal servo to a reverse servo, you need to reverse solder the servo motor wires and the potential meter wires.

cheers.

yes bro...thanks for D tips.. it means I have to dismentle D servo/... will don`t it.. thank again...

[azeman]

pardon my poor drawings but this in the only way that i can think off if u r using y cable for elevator. or u can try to program mix master channel 2 and slave channel 6 to make it go the same way. make necessary changes to % input eg -/+ to...

sorry bro ... wrong.. both servo facing out side... thahks bro...