Announcement

Collapse
No announcement yet.

need help with nitro car

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    need help with nitro car

    hi guys i have a nitro car. i just bought the fuel and everthing else. but once the engine starts running the wheels starts spinning by itself at a very fast speed for about 3 secs and the engines dies off. whats happening? can anyone help? please feel free to PM me or leave a reply. It will be better if you can leave me a SMS at 82286871

    #2
    Originally posted by spellbro View Post
    hi guys i have a nitro car. i just bought the fuel and everthing else. but once the engine starts running the wheels starts spinning by itself at a very fast speed for about 3 secs and the engines dies off. whats happening? can anyone help? please feel free to PM me or leave a reply. It will be better if you can leave me a SMS at 82286871
    Sounds like fail safe kicking in.
    Modded Esavage + 4S lipo + KB45 2300KV + HW150A
    Brushless Esky Lama with dual swash
    Esky Dauphin
    Walkera Lama 2
    Walkera 5G6
    Sparrowhawk XB + 2S lipo + 60A brushless esc + 6000kv motor.
    Brushless Mini LST + single servo mod
    Brushless Micro-T

    Comment


      #3
      seems like throttle full ball and tuning too lean.

      Check that the throttle servo pulls the carb correctly and try again.

      Gd luck

      Comment


        #4
        may i know what car u playing now? It is a RTR kit ?

        maybe u can tell more...
        .................................................. ......................

        1/10 On Road

        Kyosho VoneRRR-EvoWC

        1/8 Off-Road

        Kyosho MP9



        Member of EDMW plus NPNT

        เวลาช่วยรักษาแผลใจ
        กับผมแล้วผมเห็นว่าเราชะนะแน่

        Comment


          #5
          Strong feeling either wrong carb settings/linkage setup.Before starting,check if the servos and linkage are not binding.Take off the air filter and with the brakes on,see if there is about 1mm gap in the carbs.This is to ensure constant idling of the engine.Release the brakes and see if the 1mm gap is still there.It should not open bigger.If not trim the servos via your TX or reposition your servo horns to have that 1mm gap.

          Next,try and set your High Speed Needle to it's default settings.We cannot advise on this as different engine has different base settings .There alot of tutorials on the net and youtube.Browse around and you will learn more.Hope this helps!

          Comment


            #6
            thanks guys. manage to fixed it. but i have a problem now. which is that when i have a full tank of fuel and i start running it. it will be emptied within 2 mins. i also see dirty fuels on the chassis it self. its so much that when you tilt the car one side it will drip.

            Comment


              #7
              Too Rich...
              YOu FLy, You CRASH, YOU LEARN..

              Mini Titan
              JGF500th
              CC45
              Hitec 65HB x 3
              Futaba 9257
              Futaba GY401
              [U]colco lama v5[COLOR=Red]][COLOR=SandyBrown]
              Align Trex600N Pro


              JR PCM 9X II
              e-STATION BC6
              kong lipo
              Dualsky
              ace RC
              x TREAM

              Comment


                #8
                Originally posted by spellbro View Post
                thanks guys. manage to fixed it. but i have a problem now. which is that when i have a full tank of fuel and i start running it. it will be emptied within 2 mins. i also see dirty fuels on the chassis it self. its so much that when you tilt the car one side it will drip.
                Hi;

                I tot you said 5 min on one tank? How come now drop to 2 min?

                Comment


                  #9
                  haha. is it you don? i dunno eh. not sure why the car suddenly like that lol. sian man. come to my shop fix for me =X

                  Comment

                  Working...
                  X