Announcement

Collapse
No announcement yet.

Vcontrol Touch

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vcontrol Touch

    Hi,

    There are two things I don't like about Vcontrol.

    #1
    The clock needs to be updated through a PC (that's the only way I know how to do it) at least once a week
    as the clock slows down by about 2 minutes each week. I need the clock to be reasonably accurate as I have
    the need to know the time while I fly. I cannot believe someone can design a clock circuit that will slow down
    2 minutes per week in these days. Perhaps they use a cheapo crystal in there.

    #2
    When I turn on the Vcontrol for simulation, I need to enable the Tx simulator mode, by default it is not enabled.
    I need to do "Transmitter Setup -> USB Mode -> Simulator". Very troublesome, I need to do it every single time when
    I turn on the Tx.


    These two issues are gone in Vcontrol Touch. Good news.
    The sticks on Vcontrol touch seem to be smoother than the old Vcontrol. May be because it is new.

    However, if you do not have some knowledge in PC/Tablet and Internet, don't get the Vcontrol Touch, you will go nuts.
    I know there is one already. LOL.
Working...
X