Announcement

Collapse
No announcement yet.

VControl Touch - HW ESC Throttle Calibration

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    VControl Touch - HW ESC Throttle Calibration

    Hobbywing ESC throttle calibration with Vcontrol Touch and Vbar Neo

    1. Power up your Vcontrol.

    2. Power up the heli.

    3. On the Tx, got to Model Setup -> Edit Model Setup -> Touch "Start editing current Setup" -> Scroll down to "Governor Setup"


    Click image for larger version

Name:	Throttle_Calibration_1.jpg
Views:	1
Size:	46.3 KB
ID:	1009652


    4. Touch "Select" at the Output Setup row (i.e. the centre Select).

    Click image for larger version

Name:	Throttle_Calibration_2.jpg
Views:	1
Size:	48.5 KB
ID:	1009653


    5. Make sure that the throttle stick is all the way down. Touch the "On" button, and then touch "Yes".

    Click image for larger version

Name:	Throttle_Calibration_3.jpg
Views:	1
Size:	46.6 KB
ID:	1009654

    Click image for larger version

Name:	Throttle_Calibration_4.jpg
Views:	1
Size:	49.6 KB
ID:	1009655


    6. Power down the heli. Just the heli. Vcontrol remains power on.

    7. Now, move the throttle stick all the way up.

    8. Next, power up heli again.

    9. When you hear two confirmation beeps, move the throttle stick all the way down.

    10. That's it. Your HW ESC throttle is now calibrated.
Working...
X