Announcement
Collapse
No announcement yet.
How To Mount Hobbywing Platinum 160A V4 On Trex 700E
Collapse
X
-
I have seen the web from the front plastic part fully cut away and a kosMik fit in there.
Last edited by ah_liang; 13-07-2017, 09:57 PM.Too many helis!
-
My opinion:
1. Cutting off large portion of the plastic (especially the central vertical rib) will weaken the receiver mount structure significantly. This is undesirable.
2. A weaker structure will result in more vibration passing to the flight controller. Some flight controllers are just very sensitive to vibration, be careful.
3. A Kosmik ESC can also be mounted on the side as I described above, even Kosmik Cool can be mounted, without cutting the central rib.
4. The weaker structure may affect the latch for the battery tray.
Comment
Comment