Announcement

Collapse
No announcement yet.

Skookum Product Update

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Skookum Product Update

    Hi,

    Please note that the firmware/software V3.40 for SK540 and SK720 has been released.
    You can download it from http://www.skookumroboticsasia.com/en/?page_id=15.

    Click image for larger version

Name:	SK1.png
Views:	1
Size:	973 Bytes
ID:	991419 Click image for larger version

Name:	SK2.png
Views:	1
Size:	1.0 KB
ID:	991420

    Zenm Tech Pte Ltd
    Align Sole Distributor in Singapore
    Zolta Batteries Distributor
    Website - http://rc.zenmtech.com

    #2
    Video of SK540 testing with new software V3.40 (with new RPM GOV software).

    Zenm Tech Pte Ltd
    Align Sole Distributor in Singapore
    Zolta Batteries Distributor
    Website - http://rc.zenmtech.com

    Comment


      #3
      Sk-720

      Hi,

      The second shipment of SK720 (BE) and GPS have just arrived in Singapore.

      The following is a video link of the test flight of SK720 by a Skookum pilot, Edwin Lee.


      0 views, 8 likes, 0 loves, 3 comments, 0 shares, Facebook Watch Videos from Edwin Lee: Skookum sk720be test flight.


      Hope to have a local test flight soon.
      Zenm Tech Pte Ltd
      Align Sole Distributor in Singapore
      Zolta Batteries Distributor
      Website - http://rc.zenmtech.com

      Comment


        #4
        Some pictures of the SK-720 BE.

        The 1st SK-720 BE owner in SG mounted it on his new Trex 550 DFC. Which will be used for 3D training.

        Click image for larger version

Name:	IMG_0275.JPG
Views:	1
Size:	127.8 KB
ID:	975831
        Click image for larger version

Name:	IMG_0273.JPG
Views:	1
Size:	140.5 KB
ID:	975830
        Click image for larger version

Name:	IMG_0271.JPG
Views:	1
Size:	103.0 KB
ID:	975832
        Click image for larger version

Name:	IMG_0274.JPG
Views:	1
Size:	101.9 KB
ID:	975833
        Click image for larger version

Name:	IMG_0272.JPG
Views:	1
Size:	97.5 KB
ID:	975834

        Zenm Tech Pte Ltd
        Align Sole Distributor in Singapore
        Zolta Batteries Distributor
        Website - http://rc.zenmtech.com

        Comment


          #5
          SK-540 Clear

          Hi,

          The Skookum SK-540 Clear version FBL is now available at Zenm Tech. This is the plastic version of the standard metal case SK-540. It has all the functions of the SK-540 except the governor and bank switching features. You can upgrade to full SK-540 features through Skookum's website. The SK-540 Clear is 4g lighter and 20% cheaper as compared to metal SK-540.

          Zenmtech is a rc company base in Singapore. Our product range include rc helicopter, multicopter, spare parts, esc, bec, lipo battery, etc. We are Align, JR, Zolta distributor in Singapore.


          Click image for larger version

Name:	SK540_Clear.jpg
Views:	1
Size:	15.5 KB
ID:	976245

          Zenm Tech Pte Ltd
          Align Sole Distributor in Singapore
          Zolta Batteries Distributor
          Website - http://rc.zenmtech.com

          Comment


            #6
            SK-720 S-Buss Issue

            Hi,

            The S-Bus issue on SK-720 has been resolved, pending further tests before release of new firmware.
            Zenm Tech Pte Ltd
            Align Sole Distributor in Singapore
            Zolta Batteries Distributor
            Website - http://rc.zenmtech.com

            Comment


              #7
              New Software/Firmware (Rev 4) For SK720/SK540

              Hi,

              The new SK software/firmware has been released.



              IMPORTANT NOTES FOR THIS RELEASE:

              * There is a new setting on the “Drive System” tab, “Heli Size”. You MUST set this to get good performance!
              * If you have an SK-GPS unit, please also update its firmware.
              * Owners of an SK-540 purchased before 2013 should connect a BEC or battery during the firmware update.
              * If you lose your setup file for any reason, a backup copy can be found in the install directory at “c:\program files\skookum robotics\”


              New & Updated for this release:

              * Added UDI (JR Xbus support) receiver mode
              * Support for the 7008 Futaba receiver’s version of sbus1 protocol
              * Support for Sbus2 (needs a 2-3k resistor between signal and ground to be reliable!)
              * Support for Graupner receiver protocol
              * DMSS receiver mode improved

              * Better cyclic and tail handling for sport/3D flying
              * Expanded Multicopter support, better handling
              * Aux channels mapping changed to allow 4 control/gain channels
              * Governor gain option, governor disabled with < 2% gain.
              * Lower servo current draw
              * Higher max temperature limit
              * "Pitch Boost" option
              * Smoother cyclic bank switching
              * Allows you to set faster servo speeds
              * Option to support mechanically-linear servos
              * Option for 540hz tail servos
              * GUI shows last flight's max sustained RPM (check View menu)
              * GUI shows all gain channel readouts (check view menu)
              * No need to click "send setup" (check Preferences to
              * Option to reduce throttle to warn pilot if BEC/battery V drops

              * SK720BE will tolerate longer periods of high vibration
              * More stable self level
              * Fixed issue with SK720BE's throttle output that affected Align ESCs.

              * GPS position and Altitude hold is more precise and stable
              * GPS position slew has better handling
              * GPS rescue is faster acting and smoother
              * Lower "floor" altitude is allowed (5m now)
              * Allows for two GPS control switches, so up to 4 flight modes
              * Each GPS switch has its own "home" position, which can be re-set in flight
              * Added GPS modes: Grid, Radius, and Point
              * Improved return-home behavior
              * Extended range for return-home mode
              * Option to return home on RX signal loss (multicopter only for now)
              * GPS firmware update reduces spurious error messages

              * Pro Data viewer can now view SK540 logs
              * Governor output data added to data viewer
              * Improved Google Earth support in Pro Data Viewer (GPS only, export KML file)

              What didn’t make it into this release, but coming soon:
              * SK-LCD terminal update
              * Improved compatibility with Castle Creation ESC bail-out mode
              * Bluetooth software for Android
              Zenm Tech Pte Ltd
              Align Sole Distributor in Singapore
              Zolta Batteries Distributor
              Website - http://rc.zenmtech.com

              Comment

              Working...
              X