Announcement

Collapse
No announcement yet.

Trex600N landed

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Trex600N landed

    Price dropped..so why not? nah
    Really enjoyed how the Trex600 EP flies, so decided to get the N version too.

    The setup includes ..
    • Trex600N sport
    • TT RL53
    • Hatori #523 53NS-3D
    • BLS451 (cyclic)
    • 611+9256 (from my raptor)


    Upgrades..
    • Frame brace
    • Carbsmart mount (also a frame brace)
    • Metal mainshaft bearing block
    • Metal seesaw
    • Metal maingrip
    • New 90 degree duro damper + sleeve


    Last edited by CKS; 26-07-2008, 11:57 AM.
    Heli:
    . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
    . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
    . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
    . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
    . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

    Plane:
    . Ok Model Medallion
    . E*Star Storch
    . ElectriFly S.E.5a
    . Mpx EzGlider (Slope)

    Tx: JR 9XII

    Photo toy
    . Canon 7D & 500D
    . Canon 430EX & 580EX2
    . Canon 24-70 f2.8L
    . Canon 85mm f1.8
    . Tamron 10-22 ultrawide

    #2
    Nice.. where you got the redline engine from? wats the damage?
    YOu FLy, You CRASH, YOU LEARN..

    Mini Titan
    JGF500th
    CC45
    Hitec 65HB x 3
    Futaba 9257
    Futaba GY401
    [U]colco lama v5[COLOR=Red]][COLOR=SandyBrown]
    Align Trex600N Pro


    JR PCM 9X II
    e-STATION BC6
    kong lipo
    Dualsky
    ace RC
    x TREAM

    Comment


      #3
      Also gotten the new metal blade grip (will be using on my Trex600EP).

      For the older blade grip, the whole thing would have to be replaced in a bad crash because Align decided to make the blade grip & pitch arm as one piece item

      Align eliminated the additional elbow on the pitch arm, i hope it would provide for better 'crash replacement'.

      Heli:
      . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
      . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
      . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
      . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
      . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

      Plane:
      . Ok Model Medallion
      . E*Star Storch
      . ElectriFly S.E.5a
      . Mpx EzGlider (Slope)

      Tx: JR 9XII

      Photo toy
      . Canon 7D & 500D
      . Canon 430EX & 580EX2
      . Canon 24-70 f2.8L
      . Canon 85mm f1.8
      . Tamron 10-22 ultrawide

      Comment


        #4
        The new TT RedLine 53.
        It came with high speed needle at 2 1/4 turn.. will be running in with 3 turn though.

        I had difficulty fitting the fan & clutch mount onto the engine shaft.. is it supposed to be a rough process? or just snap on fit? Im afraid that the runout will be very bad on mine.

        Heli:
        . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
        . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
        . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
        . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
        . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

        Plane:
        . Ok Model Medallion
        . E*Star Storch
        . ElectriFly S.E.5a
        . Mpx EzGlider (Slope)

        Tx: JR 9XII

        Photo toy
        . Canon 7D & 500D
        . Canon 430EX & 580EX2
        . Canon 24-70 f2.8L
        . Canon 85mm f1.8
        . Tamron 10-22 ultrawide

        Comment


          #5
          Its quite a present surprise to know that the stock kit now comes with metal front tail pulley, I think its one of the essential upgrade for belt driven version as ive had problem with the plastic version getting its teeth going missing after a while.

          Heli:
          . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
          . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
          . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
          . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
          . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

          Plane:
          . Ok Model Medallion
          . E*Star Storch
          . ElectriFly S.E.5a
          . Mpx EzGlider (Slope)

          Tx: JR 9XII

          Photo toy
          . Canon 7D & 500D
          . Canon 430EX & 580EX2
          . Canon 24-70 f2.8L
          . Canon 85mm f1.8
          . Tamron 10-22 ultrawide

          Comment


            #6
            One layer of glass tape was pasted onto the tailboom before fitting onto the frame, again because of previous issue of belt losing tension due to shifting boom.

            some more pics..

            Heli:
            . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
            . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
            . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
            . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
            . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

            Plane:
            . Ok Model Medallion
            . E*Star Storch
            . ElectriFly S.E.5a
            . Mpx EzGlider (Slope)

            Tx: JR 9XII

            Photo toy
            . Canon 7D & 500D
            . Canon 430EX & 580EX2
            . Canon 24-70 f2.8L
            . Canon 85mm f1.8
            . Tamron 10-22 ultrawide

            Comment


              #7
              The servo horns that came with servos will not give me parallel linkage to the bell crank.. and so ive gotten the align's futaba servo horns (is this a conspiracy? are there any horns that would give parallel linkage anyway?)

              Anyway, time to runin

              Heli:
              . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
              . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
              . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
              . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
              . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

              Plane:
              . Ok Model Medallion
              . E*Star Storch
              . ElectriFly S.E.5a
              . Mpx EzGlider (Slope)

              Tx: JR 9XII

              Photo toy
              . Canon 7D & 500D
              . Canon 430EX & 580EX2
              . Canon 24-70 f2.8L
              . Canon 85mm f1.8
              . Tamron 10-22 ultrawide

              Comment


                #8
                I got the kit / engine / muffler / metal bladegrip / metal seesaw / metal fan through RCS http://shop.radiocontrol-sports.com/

                Few of the items were ordered from oversea because they're not available locally.
                Originally posted by boo_saa View Post
                Nice.. where you got the redline engine from? wats the damage?
                Heli:
                . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
                . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
                . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
                . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
                . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

                Plane:
                . Ok Model Medallion
                . E*Star Storch
                . ElectriFly S.E.5a
                . Mpx EzGlider (Slope)

                Tx: JR 9XII

                Photo toy
                . Canon 7D & 500D
                . Canon 430EX & 580EX2
                . Canon 24-70 f2.8L
                . Canon 85mm f1.8
                . Tamron 10-22 ultrawide

                Comment


                  #9
                  Hey CKS, the arms to the metal swash can be bought seperately.

                  This is the part that you need:
                  http://shop.rotor.com.sg/show-detail.asp?prodid={BF97648C-90AA-4B5C-853A-5C2DA2E3C97E}&pn=7
                  Don't PCW

                  Beam E4
                  Flybarless Trex 600N VBAR 4.0 | OS50 Hyper
                  Trex 700 LE | YS91SR3C

                  Comment


                    #10
                    Ive been looking for it but to no avail..
                    hm.. thats the linkage ball.. how about the arm?

                    something similar to http://shop.rotor.com.sg/show-detail.asp?prodid={ACB896C8-4D6B-4C9B-B4BA-DE05ADCD04B4}&pn=3
                    but how about something for Trex600 (align/aftermarket)?

                    Anyone tried kasama bladegrip with align head?

                    Originally posted by helirulz View Post
                    Hey CKS, the arms to the metal swash can be bought seperately.

                    This is the part that you need:
                    http://shop.rotor.com.sg/show-detail.asp?prodid={BF97648C-90AA-4B5C-853A-5C2DA2E3C97E}&pn=7
                    Heli:
                    . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
                    . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
                    . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
                    . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
                    . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

                    Plane:
                    . Ok Model Medallion
                    . E*Star Storch
                    . ElectriFly S.E.5a
                    . Mpx EzGlider (Slope)

                    Tx: JR 9XII

                    Photo toy
                    . Canon 7D & 500D
                    . Canon 430EX & 580EX2
                    . Canon 24-70 f2.8L
                    . Canon 85mm f1.8
                    . Tamron 10-22 ultrawide

                    Comment


                      #11
                      Fan / clutch mount is easy.. but you must use the washer that comes with the Engine.. Otherwise.. Lot's of play..

                      Originally posted by CKS View Post
                      The new TT RedLine 53.
                      It came with high speed needle at 2 1/4 turn.. will be running in with 3 turn though.

                      I had difficulty fitting the fan & clutch mount onto the engine shaft.. is it supposed to be a rough process? or just snap on fit? Im afraid that the runout will be very bad on mine.

                      Comment


                        #12
                        Ah ok, then maybe abit of inconsistency in the product.
                        Yep im using the provided washer, already hovered 3 tanks .. vibration level still acceptable.

                        Just a note, the idle needle of the RL53 was original at 1.25 turn, although no mention of changing it in the manual for initial run, but i found that 1.25 abit lean in my case (running CP30% with TT provided glowplug with no additional head shim)

                        But i really like the hex driver adjustable idle needle, alot easier than adjusting it on OS

                        Originally posted by tucfaz View Post
                        Fan / clutch mount is easy.. but you must use the washer that comes with the Engine.. Otherwise.. Lot's of play..
                        Heli:
                        . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
                        . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
                        . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
                        . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
                        . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

                        Plane:
                        . Ok Model Medallion
                        . E*Star Storch
                        . ElectriFly S.E.5a
                        . Mpx EzGlider (Slope)

                        Tx: JR 9XII

                        Photo toy
                        . Canon 7D & 500D
                        . Canon 430EX & 580EX2
                        . Canon 24-70 f2.8L
                        . Canon 85mm f1.8
                        . Tamron 10-22 ultrawide

                        Comment


                          #13
                          CKS, where did you buy the frame support? Been looking around but no avail.

                          I just bought Redline and CY ATG.
                          For the ATG, did you use the magnet provided by Align or ATG?
                          Align has 2 while ATG comes with 1. I never used gov before so am not sure about the magnets.
                          Also ATG recommended 20mm for .50 heli, but the align metal fan's holes are further than 20mm by alot, does it matter or did you drill another hole?

                          Comment


                            #14
                            HDB, don't bother about the holes.
                            Remember that you are sensing the number of times the magnet passes the sensor, not the speed at which it passes.

                            And btw, im flying the rex600n again now.
                            Don't ask why.
                            I have plans for it.

                            Thanx!
                            SLOPE SOARING NOT A CRIME

                            The irresistible desire, for the irresistibly desired

                            Multiplex Royal Evo 12 user, and Proud of it.

                            Comment


                              #15
                              Oh, my concern is, the further away, the faster the magnet will pass by. If too far, will it be over the sensitivity of what the sensor is meant for.

                              Comment

                              Working...
                              X