Announcement

Collapse
No announcement yet.

Raptor 50 Titan landed!

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    lol .. Bun doing crabbing thing already!
    not too tight on the cable tie though.. reduce the transfer of vibration

    Originally posted by HotDogBun
    Tried 95mm, rudder stops hard as a rock. The only problem I'm having now is when in forward flight and making right rudder, my tail will waver, just like Alan Szabo doing the crabbing thing Turning left during forward flight is ok.

    Edmond got this problem before on his 90 size and he solved it by using cable tie over the gyro.

    Am going to try this on my JrG770T. Hope it solves my problem too.
    Heli:
    . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
    . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
    . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
    . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
    . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

    Plane:
    . Ok Model Medallion
    . E*Star Storch
    . ElectriFly S.E.5a
    . Mpx EzGlider (Slope)

    Tx: JR 9XII

    Photo toy
    . Canon 7D & 500D
    . Canon 430EX & 580EX2
    . Canon 24-70 f2.8L
    . Canon 85mm f1.8
    . Tamron 10-22 ultrawide

    Comment


      lol you should see my eyes popping out when my tail crabbing, something below shrunk and something almost coming out
      Get to work liaoz... still got T500 to fix up also....

      Comment


        Just flew 3 flights. Lowered gyro gain from 56% to 50%, the wagging still occurs but less frequently. Looks like gain might still be too high.

        Now to solve another little issue. I can only do 6½ mins and left header tank full with about half min flight in main tank.
        After the flight, I touched the bottom cover of engine, and about 3secs my fingers will find cover getting too hot to touch.
        I am not using filter for carbuetta or whatever they spell it.
        1.75 turns opened up for the needle.
        Headspeed tagged at about 2100.

        Is my flight time normal???

        Comment


          Flight time sounded too rich... but then not sure why it was that hot
          whats your power setup again? and what kindof fuel?
          Originally posted by HotDogBun
          Just flew 3 flights. Lowered gyro gain from 56% to 50%, the wagging still occurs but less frequently. Looks like gain might still be too high.

          Now to solve another little issue. I can only do 6½ mins and left header tank full with about half min flight in main tank.
          After the flight, I touched the bottom cover of engine, and about 3secs my fingers will find cover getting too hot to touch.
          I am not using filter for carbuetta or whatever they spell it.
          1.75 turns opened up for the needle.
          Headspeed tagged at about 2100.

          Is my flight time normal???
          Heli:
          . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
          . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
          . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
          . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
          . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

          Plane:
          . Ok Model Medallion
          . E*Star Storch
          . ElectriFly S.E.5a
          . Mpx EzGlider (Slope)

          Tx: JR 9XII

          Photo toy
          . Canon 7D & 500D
          . Canon 430EX & 580EX2
          . Canon 24-70 f2.8L
          . Canon 85mm f1.8
          . Tamron 10-22 ultrawide

          Comment


            I using 20% fuel.
            RJX muffler with .50 OS Hyper.
            Many also commented my flight time very short..

            Comment


              Er wait.. u touched the backplate while the engine still idling or totally cut off?
              Originally posted by HotDogBun
              I using 20% fuel.
              RJX muffler with .50 OS Hyper.
              Many also commented my flight time very short..
              Heli:
              . Quick Japan EP8 EX (A30-8XL+CC60+Gy401)
              . Raptor 50 Titan (OS50+522+CarbSmart+Gy611)
              . Trex 600 EP (1512/3D+CC110HV+DS760 w/8900)
              . Trex 600 N (RL53+523+CarbSmart+DS760 w/8900)
              . B/W Stratus (OS91 SZ+MP5+ATG+CarbSmart+DS760 w/8900+8717)

              Plane:
              . Ok Model Medallion
              . E*Star Storch
              . ElectriFly S.E.5a
              . Mpx EzGlider (Slope)

              Tx: JR 9XII

              Photo toy
              . Canon 7D & 500D
              . Canon 430EX & 580EX2
              . Canon 24-70 f2.8L
              . Canon 85mm f1.8
              . Tamron 10-22 ultrawide

              Comment


                HDB,

                Your engine is running too rich.

                Comment


                  Originally posted by CKS
                  Er wait.. u touched the backplate while the engine still idling or totally cut off?
                  I touched it once I land my heli and stopped the blades.


                  Originally posted by ammo
                  HDB,

                  Your engine is running too rich
                  Yar, suspect so too. But if it's rich the cover plate should be cool to touch right??

                  Comment


                    To a certain extent, too rich will also increase engine temperature

                    Comment


                      Bun, have u tried to move ur servo ball link to the inner most hole on the servo horn? It gives ur tail more resolution.. In layman terms, more 'zhun'..
                      AR Drone 2.0
                      Walkera Ladybird Micro Quad
                      Jr XG8 Tx (Mode 1)
                      RG831B Rx

                      sigpic

                      Comment


                        Its already at the hole nearest to the centre liaoz
                        Now I jsut worried about the flight time for being too short.

                        Comment


                          if the engine is too rich, it will be burbling even at high rpm, your tail will be affected in terms of kicking

                          Comment


                            When I punch up the sound is quite sharp and pitchy but not burbing.
                            My tail not kicking when I punch up.
                            I am worried if I lean it any more the engine might get too hot and blow

                            Comment

                            Working...
                            X