Just found out that my hitec 7955tg doesnt go back to the centre and when the servo is still being powered up i can still move the servo arm like it is no being powered up.Is it due to the gear,or the something else?thanks!
Announcement
Collapse
No announcement yet.
Help servo problem.
Collapse
X
-
Im not sure.cant be that the amplifier is dead because i still can power the servo.maybe the gears ah.thanks!Hangar
-Extreme Flight 88" Edge 540T
-Extreme Flight 88" Extra 300
-Extreme Flight 78" Extra 300 exp
-3D Hobby Shop Extra 72" Extra 330SC
-Extreme Flight 64" MXS exp
-Extreme Flight 60" Extra 300 exp
-Extreme Flight 48" MXS exp
-Extreme Flight 48" Extra 300 exp
Comment
-
Thanks guys!found out whats the problem.my servo arm teeth has worn out,thus it slides even though powered on.Hangar
-Extreme Flight 88" Edge 540T
-Extreme Flight 88" Extra 300
-Extreme Flight 78" Extra 300 exp
-3D Hobby Shop Extra 72" Extra 330SC
-Extreme Flight 64" MXS exp
-Extreme Flight 60" Extra 300 exp
-Extreme Flight 48" MXS exp
-Extreme Flight 48" Extra 300 exp
Comment
Comment