Align After Market Parts for 600EFBL-Pro 3GX, 700N & 700E FBL Heads, 450V2 Sport Head

[daveth26]

Most after market parts have now came on shelves for the series of existing birds. Align should have done better like these...

Align 600EFBL-Pro 3GX Mainframe Reinforcing plates.

[daveth26]

Align 600EFBL-Pro 3GX Battery Aluminum Battery Tray Holder by KDE...The original stock is plastic

[daveth26]

Align 700N Front Receiver Mount After Market. Relieves 65g of weight from original stock.

[daveth26]

Align 700EFBLV2, 500EFBLV2, 450 Sport V2 FBL all adopted new heads for a whole higher level of experience.

Notice the swivel pivots are at the heads now....

[daveth26]

Align GPS New Module with Receiver Combo...

Leaked 3GX GPS Module with 2 x satellite receivers. As posted on sites, details as follows:

"3GX GPS Module made by Align have to use with 3GX, it is divided to module and receiver.
When the 3GX engineer takes this 700N out, we see the three functions of the GPS."

After satellite positioning, GPS will remember the current position and height, you can let your helicopter hover, and it can stay at the position without control. If you want to make it higher or lower, you can control the stick to make it up and down.

While flying mode, as you pushed the stick all the way, your helicopter will move forward, but the height will not change, and while you stopped pushing, your helicopter will stop automatically.

Auto return mode, if your helicopter goes too far away or you are not sure the direction, you can press the switch, and the helicopter will go back to the initial position.

The product is expected to sell since the end of the year or the beginning of the year.

[daveth26]

Align GP900 FB Gyro..

Adopted 3GX system but for Flybar models with connectivity JR/Spectrum Satellites or S-bus Futaba...

[Adrianli]

All these can be found at www.infinity-hobby.com

[ManOnTheMoon]

Leaked 3GX GPS Module with 2 x satellite receivers. As posted on sites, details as follows:

"3GX GPS Module made by Align have to use with 3GX, it is divided to module and receiver.
When the 3GX engineer takes this 700N out, we see the three functions of the GPS."

After satellite positioning, GPS will remember the current position and height, you can let your helicopter hover, and it can stay at the position without control. If you want to make it higher or lower, you can control the stick to make it up and down.

While flying mode, as you pushed the stick all the way, your helicopter will move forward, but the height will not change, and while you stopped pushing, your helicopter will stop automatically.

Auto return mode, if your helicopter goes too far away or you are not sure the direction, you can press the switch, and the helicopter will go back to the initial position.

The product is expected to sell since the end of the year or the beginning of the year.

looks like it can mimick all that helicommand auto stab does..

wonder how much is going to be.will be an interesting learning tool for beginners