Hi,
Selling off an European crack Yak 3D plane as shown. Great plane for learning to hover and 3d maneuvers. Installed with all recommended setup including 3 digital servos, techone AS2212 brushless motor and 12amp esc. Total cost of plane alone cost close to $300 without battery.
Throw in 9 x 3s 850mah lipos (with 1 original crack lipo), foam repair glue, 2 new spare props (including an APC), and many O rings for unlimited practice time. Plane has multiple knocks and cracks but all repaired and plane still hover like a pro!
Not for fussy buyer. Can do hover demo upon request. Selling to clear space for new project.
ASK $115
Collect at Suntec Tower 2 during office hours or adam road hawker center after 7pm. Reach me at 91369814 (SMS only) for any query.
Thanks for viewing.
Selling off an European crack Yak 3D plane as shown. Great plane for learning to hover and 3d maneuvers. Installed with all recommended setup including 3 digital servos, techone AS2212 brushless motor and 12amp esc. Total cost of plane alone cost close to $300 without battery.
Throw in 9 x 3s 850mah lipos (with 1 original crack lipo), foam repair glue, 2 new spare props (including an APC), and many O rings for unlimited practice time. Plane has multiple knocks and cracks but all repaired and plane still hover like a pro!
Not for fussy buyer. Can do hover demo upon request. Selling to clear space for new project.
ASK $115
Collect at Suntec Tower 2 during office hours or adam road hawker center after 7pm. Reach me at 91369814 (SMS only) for any query.
Thanks for viewing.
Comment