Announcement

Collapse
No announcement yet.

Quanum Q-3D high performance, 3-Axis brushless camera gimbal

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Quanum Q-3D high performance, 3-Axis brushless camera gimbal

    Selling a almost (used once) Quanum Q-3D high performance, 3-Axis brushless camera gimbal that is designed for use with the GoPro Hero 3 and Quanum FPV+ cameras on 350~500 size multi-rotor models (such as the Quanum Nova, Scout X400, TALI H500, QR X350 PRO and DJI Phantom).

    When it comes to a great aerial video platform, a few things are key; design, size, weight and performance. The Q-3D is a design that has been optimized from the start for proper integration, saving on size and weight and the pre-tuned controller performs just as you would expect from Quanum.

    The Q-3D is one of the smallest and lightest 3-axis brushless gimbals on the market. At just 110mm tall, it can clear most multi-rotor landing skids and only weighs 185g, perfect for 350~500 sized multi-rotors. Both pitch and roll can be adjusted on the fly from an R/C channel and has a huge operating voltage range of up to 28 volts.

    The Q-3D is pre-tuned from the factory, requiring no setup, simply bolt on to the bottom of the Quanum Nova, Scout X4, QR X350 PRO or DJI Phantom, install your GoPro Hero 3/Quanum FPV+ camera and you're ready to shoot professional stabilized aerial video!

    Features:
    • Lightweight yet duable aluminum construction
    • Compact size
    • Adaptable to most 350~500 size multi-rotor models (direct fit for Nova, Scout X4, TALI H500, QR X350 PRO and DJI Phantom)
    • Pitch and roll control inputs
    • Support for the GoPro Hero 3 video aux output
    • Huge input voltage support (7.4~28V)
    • Power supply voltage reverse connection protection and voltage compensation
    • Motor drive side short circuit protection
    • Initial pitch angle
    • Sensitivity parameters adjustment

    Specs:
    Operating voltage:*DC 7.4V~28V (recommended 12V, 3S Li-Po battery)
    Operating current:*500mA~600mA (depends on the voltage supplied and motor power)
    Operating temperature:*-15°C~65°C
    Sensor:*3-axis MEMS gyro and 3-axis MEMS accelerometer
    Control accuracy:*0.02°
    Angle control range:*-135°~90°(tilt); -45°~45°(roll)
    Applicable camera:*iLook / iLook+ / GoPro series / Tunigy ActionCam
    Weight:*188g (without camera)
    Dimension:*114.3x97.5x106.6mm
    Box dimension:*150x127x98mm

    Asking $130, please contact me at 9119 9752
    Attached Files

    #2
    Sold. Thanks

    Comment

    Working...
    X