Hi guys. Just a small question; is it advisable to use separate power for rx on Logo500? My current setup is Sbus to mini VBar and taking power from the mains of 6s5000mah. Wat are the pros and cons. Have a spare LiFe 2s1000mah which could be use to power the rx. Or can I power the rx and system with the LiFe and disconnect the single power line from ESC or vice versa? Much appreciated. Thanks
Announcement
Collapse
No announcement yet.
Powering of Logo 500
Collapse
X
-
it was the JR vibe 50 with 2s BEC...too long never use lipo so thought it was usable. halfway through, one cell upz lorry n the vbar went all apeshit. I lost all control of servos cos of cos rx lipo went under 4v. here's the strange part: I was actually able to balance -charge the 2s lipo to 8.4v so how on earth the lipo pack just up like that?Heli-ADDICTION:
Mikado Logos, RaptorG4s, X7F, 600ESP...
JUST one more Logo...for the month.
Comment
-
Originally posted by feudallordcult View Postit was the JR vibe 50 with 2s BEC...too long never use lipo so thought it was usable. halfway through, one cell upz lorry n the vbar went all apeshit. I lost all control of servos cos of cos rx lipo went under 4v. here's the strange part: I was actually able to balance -charge the 2s lipo to 8.4v so how on earth the lipo pack just up like that?
Comment
-
Originally posted by Ajaking View PostThanks for all the advice and suggestions. Will likely change the ESC as I'm more familiar with Hobbywing or maybe some other brands. In this case using the BEC from ESC and also a buffer pack for the rx. Now...what ESC should I consider?Heli-ADDICTION:
Mikado Logos, RaptorG4s, X7F, 600ESP...
JUST one more Logo...for the month.
Comment
Comment