Announcement

Collapse
No announcement yet.

Using Align 130A ESC with Vbar Governor

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Using Align 130A ESC with Vbar Governor

    Hi,

    If you are using the Align ESC 130A (or Hobbywing Platinum V4 130A) with the Vbar Neo governor (or whatever Bar you may be using), here is some information for you.

    Do not use the "Heli Linear Throttle" mode, use the "Fixed-wing" mode. Using Heli Linear mode may cause the motor to bog or less responsive.

    Don't worry about the fast spool up with fixed-wing mode, it will be taken care by the Vbar governor (Vbar will slow down the spool up).
    The spool up speed can be set in the Vbar settings.

    Select "1" for the 'Startup Power" in the ESC settings.


    The "Heli Linear Throttle" mode is used without external governor.

    #2
    The hobbywing governor is also very good.
    Too many helis!

    Comment


      #3
      We prefer to use the Vbar governor as we can set the exact head speed we want.

      Comment


        #4
        Someone asked if there is any tail kick as reported in Helifreak.

        We tested with the following helis without any tail kick.

        - Trex 600 DFC
        - Trex 700 DFC
        - Trex 700X

        Comment

        Working...
        X