For Sale (need to make space):
3D Robotics X8+
The 3DR workhorse octocopter is equal to any task. With a flight time of 15 minutes and a payload capacity of over 800 grams, the X8+ is the perfect platform for aerial video.
Included:
Fully assembled, configured and tuned 3D Robotics X8+ with
Add your Receiver, Video Transmitter and Battery and fly.
Note: VTX and Receiver are not included. IMRC VTX (2.4Ghz or 5.8Ghz are plug and play though as all cables are there for them).
Full TX configuration for Taranis available.
Requires 4S flight packs (I used 4S 5,000mAh and 4S 10,000mAh)
Price: 1,250 S$.
View or collect at my place near Hillview/Bukit Batok East
3D Robotics X8+
The 3DR workhorse octocopter is equal to any task. With a flight time of 15 minutes and a payload capacity of over 800 grams, the X8+ is the perfect platform for aerial video.
Included:
Fully assembled, configured and tuned 3D Robotics X8+ with
- 8x Motors
- 8x 3DR 20A SimonK ESCs
- original Pixhawk FlightController with 3DR u-blox LEA-6H Module
- APM copter 3.2 installed, fully configured and tuned
- 2 full sets (16 pieces) of APC 10 and 11'' props
- Telemetry Radio 3DR Radio v2 (433 MHz)
- DYS AlexMos 3Axis GoPro Gimbal (modified for 2 Axis use as I had problems tuning the 3rd Axis, parts for 3rd axis included)
- RunCam 2 800 TVL Flight Camera
- Video Switcher (3 way, currently configured to switch between Gimbal and flight cam)
- OSD
- Filtered power for Video transmission as well as 5V power for GoPro pre-installed
Add your Receiver, Video Transmitter and Battery and fly.
Note: VTX and Receiver are not included. IMRC VTX (2.4Ghz or 5.8Ghz are plug and play though as all cables are there for them).
Full TX configuration for Taranis available.
Requires 4S flight packs (I used 4S 5,000mAh and 4S 10,000mAh)
Price: 1,250 S$.
View or collect at my place near Hillview/Bukit Batok East
Comment