Announcement

Collapse
No announcement yet.

KDS Chase 360

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    The Chase 360 kits have arrived.

    Click image for larger version

Name:	IMG_2466a.jpg
Views:	1
Size:	37.4 KB
ID:	978934
    Zenm Tech Pte Ltd
    Align Sole Distributor in Singapore
    Zolta Batteries Distributor
    Website - http://rc.zenmtech.com

    Comment


      #17
      Hi,

      You can download the Chase 360 manual from the following link:

      Zenm Tech Pte Ltd
      Align Sole Distributor in Singapore
      Zolta Batteries Distributor
      Website - http://rc.zenmtech.com

      Comment


        #18
        From the manual, it looks like it is not easy to replace the main gears? Not sure how to put it in without the removing both belts?

        Comment


          #19
          KDS Chase 360

          Originally posted by rchobbyfly View Post
          From the manual, it looks like it is not easy to replace the main gears? Not sure how to put it in without the removing both belts?
          Remove the motor mount all belt can change, Gear likely will not strip as this is belt driven.

          Comment


            #20
            Originally posted by Lsiow View Post
            Remove the motor mount all belt can change, Gear likely will not strip as this is belt driven.
            i see.

            Comment


              #21
              The main thing with their belt drive setup is the dual stage belt/gear transmission from the motor to the main shaft. Their primary goal was to allow for many various gear ratios that would allow for an increase in efficiency ( bigger ratio, supposedly gives better flight times , all other variables kept constant). Gear stripping most likely won't happen, going by their pics, description and the size of their belt tooth module. It's just down to the quality of the belt they are using to gauge how long the belt will last.

              Too bad no chance to go down and take a look. Hearing from other forum that the KD motor was designed to be a beast, as well as be more efficient than the Scorps.

              Comment


                #22
                What servos would you recommend for the Chase 360?
                Cyclic ....
                Tail ....

                Thanks to all the 'old birds' in advance.

                Comment


                  #23
                  any setup for the Trex 450 Pro will work.

                  5065MGs digitals
                  and a 9257 for tail or similar class.

                  Comment


                    #24
                    The bundled motor in the combo is Scorpion 2520 1880Kv, a very popular scorpion for the Gaui X3 and other 6s 450 sized helis.

                    Originally posted by MicroHeli-Nut View Post
                    The main thing with their belt drive setup is the dual stage belt/gear transmission from the motor to the main shaft. Their primary goal was to allow for many various gear ratios that would allow for an increase in efficiency ( bigger ratio, supposedly gives better flight times , all other variables kept constant). Gear stripping most likely won't happen, going by their pics, description and the size of their belt tooth module. It's just down to the quality of the belt they are using to gauge how long the belt will last.

                    Too bad no chance to go down and take a look. Hearing from other forum that the KD motor was designed to be a beast, as well as be more efficient than the Scorps.

                    Comment

                    Working...
                    X