Himark Outrunners

[mack]

Hi All,
New Himark Outrunners would be coming upon order.

These motors C2808/xx and C2812/xx are clones of AXI2208/xx and AXI2212/xx respectively. They comes with radial mount, prop adaptor and connectors. Prices are very good.

Let me know if you are interested in any of them.

Cheers,
mack

[mack]

And here are some specs of the outrunners: -

HIMARK OUTRUNNERS SPECS

1/ C2808-20 Himark Outrunner BL Motor Kv1720
Kv(rpm/V) : 1720
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 8~12A
MAX current A : 13.4A
Diameter(mm) : 28mm
Length(mm) : 25mm
Weight : 44g

2/ C2808-26 Himark Outrunner BL Motor Kv1360
Kv(rpm/V) : 1360
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 5~9.6A
MAX current A : 10.7A
Diameter(mm) : 28mm
Length(mm) : 25mm
Weight : 44g

3/ C2808-34 Himark Outrunner BL Motor Kv1080
Kv(rpm/V) : 1080
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 4~7.2A
MAX current A : 8A
Diameter(mm) : 28mm
Length(mm) : 25mm
Weight : 44g

4/ C2812-20 Himark Outrunner BL Motor Kv1200
Kv(rpm/V) : 1200
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 8~12A
MAX current A : 13.4A
Diameter(mm) : 28mm
Length(mm) : 29mm
Weight : 56g

5/ C2812-20 Himark Outrunner BL Motor Kv920
Kv(rpm/V) : 920
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 5~9.6A
MAX current A : 10.7A
Diameter(mm) : 28mm
Length(mm) : 29mm
Weight : 56g

6/ C2812-20 Himark Outrunner BL Motor Kv720
Kv(rpm/V) : 720
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 4~7.2A
MAX current A : 8A
Diameter(mm) : 28mm
Length(mm) : 29mm
Weight : 56g

Kindly send a PM to me if you require more information.

[Super-Hornet]

Mack... can u pm with the price? I might interested.

Super-Hornet

[mack]

There are some errors in the specs. Here are the corrections for the motors affected.

5/ C2812-26 Himark Outrunner BL Motor Kv920
Kv(rpm/V) : 920
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 5~9.6A
MAX current A : 10.7A
Diameter(mm) : 28mm
Length(mm) : 29mm
Weight : 56g

6/ C2812-34 Himark Outrunner BL Motor Kv720
Kv(rpm/V) : 720
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 4~7.2A
MAX current A : 8A
Diameter(mm) : 28mm
Length(mm) : 29mm
Weight : 56g

Super-Hornet, I would send the prices to you shortly.

Kindly note that the shaft diameter of the himark outrunners are the same as the AXI. That means you could use the prop adaptor and prop saver from AXI too.

The weights are 1g lighter than AXI. The C2808-xx are like the AXI2208/xx and the C2812-xx are like the AXI2212/xx.

Cheers,

[mechplas]

5/ C2812-26 Himark Outrunner BL Motor Kv920
Kv(rpm/V) : 920
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 5~9.6A
MAX current A : 10.7A
Diameter(mm) : 28mm
Length(mm) : 29mm
Weight : 56g


4/ C2812-20 Himark Outrunner BL Motor Kv1200
Kv(rpm/V) : 1200
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 8~12A
MAX current A : 13.4A
Diameter(mm) : 28mm
Length(mm) : 29mm
Weight : 56g

1/ C2808-20 Himark Outrunner BL Motor Kv1720
Kv(rpm/V) : 1720
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 8~12A
MAX current A : 13.4A
Diameter(mm) : 28mm
Length(mm) : 25mm
Weight : 44g

Mack: from the above three that I have picked, which would be suitable to be used with my existing 3s 1250 lipo and CC25P. I am planning it to be used on URL=http://www.rcgroups.com/forums/showthread.php?t=271581]F18 thread on rcgroups[/URL]

[mack]

hi, just sent u a PM.

[mechplas]

1/ C2808-20 Himark Outrunner BL Motor Kv1720
Kv(rpm/V) : 1720
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 8~12A
MAX current A : 13.4A
Diameter(mm) : 28mm
Length(mm) : 25mm
Weight : 44g

Mack: I need quote for the above. Will it be better if I get a combo, say with a CC25P ESC....cheaper right?

[mechplas]

Thread from RCGroups

I have a reply from the above thread that 2212/34 w 10x7 prop and etec 1200 can do the job for the F18. The video is also cool.

F18 Video

[mack]

Wow, then it would also consume lesser current.

I would try to make a combo for you lah! So, you are looking for AXI2212/34 or C2812/34?
a
cheers,
mack

[mechplas]

Originally posted by mack
Wow, then it would also consume lesser current.

I would try to make a combo for you lah! So, you are looking for AXI2212/34 or C2812/34?
a
cheers,
mack

I have the Axi 2212/34 previously on the Cap232 which I am now mounting onto the F18.

I am interested to try something different. Something generic to Axi 2212/26 would be the one below right? Please give me a quote for this one.

C2812-26 Himark Outrunner BL Motor Kv920
Kv(rpm/V) : 920
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 5~9.6A
MAX current A : 10.7A
Diameter(mm) : 28mm
Length(mm) : 29mm
Weight : 56g

Thanks.

Oh...and the bundle w ESC CC25P price also...

[Monkey]

hi , i am interested... Pm me the price pls... where to collect? ready stock?

[fuse]

C2812-26 Himark Outrunner BL Motor Kv920
Kv(rpm/V) : 920
Shaft Diameter (mm) : 3.17mm
Cells NO : 2~3(Li-poly)
Current A : 5~9.6A
MAX current A : 10.7A
Diameter(mm) : 28mm
Length(mm) : 29mm
Weight : 56g


can the above take 11x4.7 prop? any data?

[loyn]

I think everybody is waiting for further information about the out runner as without the prop size vs thrust and current. It make it difficult for the selection.

Mack more information is needed....thks

[HZM]

Originally posted by loyn
I think everybody is waiting for further information about the out runner as without the prop size vs thrust and current. It make it difficult for the selection.

Mack more information is needed....thks

U buy my inner runner and I take the risk to go w this outrunner lah

Cheers

Mike

[fuse]

clever mikey