Pin Layouts for TXs to use for Sims / PPJoy Driver

[PhiBeR]

Pin Layouts for various buddy/trainer leads for TX-end..

Buddy Pinouts

Here's some pin layouts for some popular TXs..
Esp, the hard to find Futaba 9C pin layout!

Esp useful for Sims since we only need a signal n ground pin.

Also, PPJoy is a joystick emulator to use with Win XP for FMS
and many other popular RC Sim..

Courtesy of AceViperX!

PPJoy is a joystick device driver for Windows 2000 and later


Now u can train n DuNk like Bon via FMS!! heh..

Mike: Can we have a sticky on RC Sims DIY Cables/Resources?

[PhiBeR]

http://www.heliguy.com/nexus/fmsinterface.html

Website with the interface..
Get the parts SHOWN IN PIC to make ur own cable..

Else pay me $10 i will make one for u!

[Benqbc]

$10 and everything u provide?

[koon]

Very reasonable price(or have you regreted asking too low now?)
I would like to have one if it work with Futaba 9CHP.PM me.

[PhiBeR]

Hahaha.. yeah.. now i wan to raise price liao..
I busy to do for u all leh.. muz go get components somemore..
I'm using one for my 9CHP now, but the plug is substituted by 2 pins..

Thinknig of getting the 9C plug for abt $10-$15 and then making it..
Will be much better!

If i do make some, i will sell at juz abit above cost to cover
my travel fare and parts lor! ;)
Maybe bundle with RF G2...

[plasma]

you can also use a stereo jack and plug it into the mic input of your soundcard.
for JR tx, you can do a direct connection

for futaba and other tx, you need to refer to http://www.sekiriki.jp/smartpropo/manual.html
to do a mod so that your signals can be fed into tthe mic input

then by using ppjoy - joydll, you can create a virtual joystick port to be use in flight sim.

cheers

[koon]

Thks Plasma,would you consider DIY this to sell?could fund your RC hobby and I'll be your first customer.

[koon]

Phiber , my offer to you still stand, its fair for you to markup some margin. Maybe you should bundle it with RF G2 and put them up in the Market Place.. I'm sure you'll get some respond.

[koon]

and that's how Bill Gate and Sim Bong Hu started....

[Benqbc]

Originally posted by PhiBeR
Hahaha.. yeah.. now i wan to raise price liao..
I busy to do for u all leh.. muz go get components somemore..
I'm using one for my 9CHP now, but the plug is substituted by 2 pins..

Thinknig of getting the 9C plug for abt $10-$15 and then making it..
Will be much better!

If i do make some, i will sell at juz abit above cost to cover
my travel fare and parts lor! ;)
Maybe bundle with RF G2...

i'll seriously get from you if the price is right..

[HZM]

Originally posted by koon
and that's how Bill Gate and Sim Bong Hu started....

Sim Wong Hoo?

Mike

[koon]

Yeah, I mean Creative's boss Mr. Sim. I hope one day we'll have our own locally produce Micro Heli, as good as zoom, T rex. just put in a small buck to start the ball roll...

[plasma]

err. i think you can just follow the diagram on the smartpropo webby if your tx is futaba.
if your tx is JR, then just purchase a stereo cable and connect your tx to the pc.
if you need any help in configuring you can always pm me.

[plasma]

i think the cost price of making a futaba mod is less than 3 bucks from sim lim tower. you just need some resistors and some connecting wires.

[koon]

Thks, Plasma.