My braking sucks!

[Shoot_RS4MT2]

So do i need to change servos or change the brake pad?

or change brake pad 1st then if still sucks, change servos?

or just change servos?

[Orangie]

So do i need to change servos or change the brake pad?

or change brake pad 1st then if still sucks, change servos?

or just change servos?

Sucks????? Too strong or too weak?

Too strong/lock, change to a fibre disk. Should be able to ease down the bitting

[Shoot_RS4MT2]

too weak... hehe sollie i missed out

[neo]

standard 3kg servo should be ok . I use a sanwa 102 for my Madforce. i brake can lock and the back flew up. May be is the brake disc got oil

[Shoot_RS4MT2]

standard 3kg servo should be ok . I use a sanwa 102 for my Madforce. i brake can lock and the back flew up. May be is the brake disc got oil

how much ur sanwa 102??
I can just change the throttle servo only rite?

[Artyspec]

sanwa 102 very cheep. around 18bucks from winnie OR 35 bucks from hobby bug. You could try 645MG, its good.

[Shoot_RS4MT2]

sanwa 102 very cheep. around 18bucks from winnie OR 35 bucks from hobby bug. You could try 645MG, its good.

State how much ley...

[Artyspec]

check rotor webbie lah! 50+

[neo]

645 has 9.6kg of torque which is not necessarily for throttle.645 is not so responsive 0.24. get a high speed one, around 0.11 or 625 which is 0.18. $62.20 from rotor for 625 and 645.

[neo]

how much ur sanwa 102??
I can just change the throttle servo only rite?

yes u can just change the throttle servo only. Should be less than $20 for 102. 3kg torque and 0.2 something speed

[neo]

u can also try 525BB 0.16 4kg torque.

[Artyspec]

but braking need high torque wad...

[neo]

a 3kg torque servo can make a 1/8 madforce brake lock and back flew up. I should say 3kg is enough. may be mt2 brake mechanism is weak , that requires more .

[Shoot_RS4MT2]

yes u can just change the throttle servo only. Should be less than $20 for 102. 3kg torque and 0.2 something speed

ok cool...
I could get this at rotor?
I dun think Tai Sing have it ley..

[Orangie]

Have you tried adjusting the linkage or the EPA?