Announcement

Collapse
No announcement yet.

My latest Flight...

Collapse

Zenm Tech Pte Ltd

Collapse

Visit Zenmtech at rc.zenmtech.com

X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    My latest Flight...

    that ends with a crash cos i was stupid..

    video of my trex doing loops, rolls, inverted flight and circuits in between and of cos, my crash at the end.

    beware large file.
    Trex 450.
    Trex 500.
    9CHP.

    #2
    You are wonderful Ben! may I know what is (was) your setup? Motor? ESC? Battery?

    Comment


      #3
      Originally posted by koon
      You are wonderful Ben! may I know what is (was) your setup? Motor? ESC? Battery?
      cc25 (older model without mosfet according to Frank)
      align 400LF 2800KV
      Etec 3S 1700 lipo (i think this one is losing its charge already)
      stock CCPM
      stock flybar and paddles
      stock swash plate
      newer main rotor hub <-- that needs 2 O rings each side
      upgraded level arms
      315 wooden blades
      345 extended boom.
      HS55 for cyclics and pitch
      HS81 MG for tail servo
      Gy401 gyro
      rchover battery and reciever tray <-- i dont find this really useful
      rchover vertical tail fin

      the newer main rotor hub broke on impact, somehow this saved my spindle shaft and blades, 1 blade was intact the other slightly bent. but i lost 2 linkages and the swash plate was damaged as 1 ball link was ripped out together with that lost linkage.
      Trex 450.
      Trex 500.
      9CHP.

      Comment


        #4
        Wah liew!! i feel ashamed!!
        Now u into 3D and i'm still hovering.. hehehe..

        But i see that the switch to Trex from the Zap has done u wonders!
        And with the zap, u were like nowhere close to this level!
        WAH, now who's still saying the Trex can't perform??

        Loops, rolls, and inverted hover! very very nice flight!!

        If i can do all that, i wouldn't mind a crash at the end!

        Think at the end hor, u joker la.. i think a forward flip would have been easier?? hehehe..
        But very nice la! i can't even FF..

        Comment


          #5
          thanks for all the encourangements! I'll try to do better next time..
          i was too stupid at the end to do the flip..
          Trex 450.
          Trex 500.
          9CHP.

          Comment


            #6
            Thks Ben.Just got my 2nd hand Trex, looking for the best setup. btw, what is your pinion teeth for your 400LF motor? 15? motor and battery temp ok?

            Comment


              #7
              Originally posted by koon
              Thks Ben.Just got my 2nd hand Trex, looking for the best setup. btw, what is your pinion teeth for your 400LF motor? 15? motor and battery temp ok?
              sorry for late reply.. just came back from my mini honeymoon at sentosa.
              I'm using 15t pinion, battery temp i never measure before so cant answer.
              I've not measured my rotor head speed also.. seems low to me, even when using 15t.
              Trex 450.
              Trex 500.
              9CHP.

              Comment

              Working...
              X