T E A M
!NEW COMPY300 KIT CCPM BELT!
Introducing the awesome J-TEAM Compy 300 mid-sized aerobatic 3D micro electric
helicopter featuring a full CCPM setup and a belt-driven tail rotor.
The crowning achievement of J-TEAM's research and development team, the Compy 300's
unique design makes it capable of extreme 3D aerobatic maneuvers, which bulkier and heavier
helicopters struggle with. In addition, it is psychologically less intimidating to
the pilot compared to larger helis with high operating head speed.
Due to the light-weight and compactness of the Compy 300 (equivalent in size to the
GWS DragonFly fixed pitch and ESKY CP2 collective pitch micro electric helicopters),
it requires no more than a 3s 1300mAh lithium polymer battery for optimal weight/power ratio,
as compared to heavy and expensive high capacity lithium polymer batteries
(1800mAh ~ 2200mAh) required on larger 3D electric helicopters
For a demonstration of the aerobatic performance of the J-TEAM Compy 300 3D micro
electric helicopter, click on the video links below, sit back and enjoy the show...
VIDEO 1
VIDEO 2
SPEC
Length w/o rotor: 500mm
Main rotor: 550mm
Tail rotor:140mm
AUW: approx. 395g
Main gear: 140T
Belt Gear: 40T
Tail Gear: 11T
Head/Tail Speed Ratio: 3.63
1SET $ 150 NOW!
2SET $ 290
Cyclic/Collective Pitch Mixing Design(CCPM)
Simple collective pitch design, direct push and pull linkages minimize excessive slop and weight.
Bearing built-in mixing arms give out precision movement.
120 degree CCPM Swashplate
We used the most common 120 degree CCPM swashplate, which widely supported by most brand of transmitters.
Changeable linkage balls design. Just change them when you get any slop in ball linkages
120 Degree Servo Mount
All servos rotate in same direction during pitch movement which ensure swashplate have same leveling.
Direct Belt Driven Tail
Durable belt driven tail and simple direct driven design reduce both noise and weight.
3mm belt with 12mm tail boom, you can swap to other tails whenever you like!
Dual Push & Pull Tail Pitch Slider
Applied the Dual Push & Pull Tail Pitch slider design to gives out zero slop rudder.
Changeable linkage balls design. Just change them when you get any slop in ball linkages.
Introducing the awesome J-TEAM Compy 300 mid-sized aerobatic 3D micro electric
helicopter featuring a full CCPM setup and a belt-driven tail rotor.
The crowning achievement of J-TEAM's research and development team, the Compy 300's
unique design makes it capable of extreme 3D aerobatic maneuvers, which bulkier and heavier
helicopters struggle with. In addition, it is psychologically less intimidating to
the pilot compared to larger helis with high operating head speed.
Due to the light-weight and compactness of the Compy 300 (equivalent in size to the
GWS DragonFly fixed pitch and ESKY CP2 collective pitch micro electric helicopters),
it requires no more than a 3s 1300mAh lithium polymer battery for optimal weight/power ratio,
as compared to heavy and expensive high capacity lithium polymer batteries
(1800mAh ~ 2200mAh) required on larger 3D electric helicopters
For a demonstration of the aerobatic performance of the J-TEAM Compy 300 3D micro
electric helicopter, click on the video links below, sit back and enjoy the show...
VIDEO 1
VIDEO 2
SPEC
Length w/o rotor: 500mm
Main rotor: 550mm
Tail rotor:140mm
AUW: approx. 395g
Main gear: 140T
Belt Gear: 40T
Tail Gear: 11T
Head/Tail Speed Ratio: 3.63
1SET $ 150 NOW!
2SET $ 290
Cyclic/Collective Pitch Mixing Design(CCPM)
Simple collective pitch design, direct push and pull linkages minimize excessive slop and weight.
Bearing built-in mixing arms give out precision movement.
120 degree CCPM Swashplate
We used the most common 120 degree CCPM swashplate, which widely supported by most brand of transmitters.
Changeable linkage balls design. Just change them when you get any slop in ball linkages
120 Degree Servo Mount
All servos rotate in same direction during pitch movement which ensure swashplate have same leveling.
Direct Belt Driven Tail
Durable belt driven tail and simple direct driven design reduce both noise and weight.
3mm belt with 12mm tail boom, you can swap to other tails whenever you like!
Dual Push & Pull Tail Pitch Slider
Applied the Dual Push & Pull Tail Pitch slider design to gives out zero slop rudder.
Changeable linkage balls design. Just change them when you get any slop in ball linkages.