Quick of Japan EP8-V2
Kits and spares for the EP8-V2 has arrived.
Heli features fully CNCed parts and components,
Requires no further upgrade at all!
Extremely high quality manufacturing!
Main Rotor Diameter: 890mm
Main blades: 400mm Wood blades
Designed with 3mm flybar
Ready to fly weight: 1.2 - 1.5kg
Version 2 has taken into account changes in the motor mount to suit more popular motors. Tail reduction ratio has also been adjusted to allow for higher running headspeeds.
This heli allows an extremely flexible setup with equipment.
Servos: HS81 (most popular)
Motor: Hacker A30-10L onwards (depending on personal flying demands and configuration)
Mega 16/25/xx motors are also some of the popular ones.
ESC: 30 amps onwards (depending on personal flying demands and configuration)
Battery: 3s2p 2100 Mah onwards (if the latest 30C batteries are used, 1P should be sufficient)
For flyers who demand high power, higher voltage setups are recommended. There have been testings done with up to 9s setups with great success.
Retail price is $480
DADDYHobby Members enjoy a discounted price of $450 only
There is no pinion included in the kit.
Kits and spares for the EP8-V2 has arrived.
Heli features fully CNCed parts and components,
Requires no further upgrade at all!
Extremely high quality manufacturing!
Main Rotor Diameter: 890mm
Main blades: 400mm Wood blades
Designed with 3mm flybar
Ready to fly weight: 1.2 - 1.5kg
Version 2 has taken into account changes in the motor mount to suit more popular motors. Tail reduction ratio has also been adjusted to allow for higher running headspeeds.
This heli allows an extremely flexible setup with equipment.
Servos: HS81 (most popular)
Motor: Hacker A30-10L onwards (depending on personal flying demands and configuration)
Mega 16/25/xx motors are also some of the popular ones.
ESC: 30 amps onwards (depending on personal flying demands and configuration)
Battery: 3s2p 2100 Mah onwards (if the latest 30C batteries are used, 1P should be sufficient)
For flyers who demand high power, higher voltage setups are recommended. There have been testings done with up to 9s setups with great success.
Retail price is $480
DADDYHobby Members enjoy a discounted price of $450 only
There is no pinion included in the kit.
Like dat also can see
Comment