Anyone can help me out with some parts?

[Alfie]

Hi guys!

I need help on some links for my Clodbusters. Would any be able to help me do some links?

The dimensions are as follow:

1) 140mm (length) x 6mm (diameter), with 3 mm threaded holes on both ends. Material to be aluminium, able to be used as suspension arms. Need 8 pieces.

Please let me know how much you would do these links for.

Thanks in advance!
Alfie

[HZM]

A few guys who bought the machine is doing links for ppl. I try to hook them up w you

Mike

[Alfie]

Thanks in advance, Mike!

I might buy the Mill from you at a later date, given that I have no extra funds from my Australia trip.

Thanks again!
Alfie

A few guys who bought the machine is doing links for ppl. I try to hook them up w you

Mike

[Babylon5]

Need Help in RC plane hobby

A few guys who bought the machine is doing links for ppl. I try to hook them up w you

Mike

Hi Mike, I am a newbie in this forum and need your guidance.
I want to know if anyone who can help me to enlarge the prop adaptor openings from 2.0mm to 2.3mm. You may ask me why don't buy a new prop adaptor.
Well this prop adaptor is from a 55mm electric ducted Fan from Jet Hobby.
It is unique , could not get any closer match.I probably need a lathe to enlarge the shaft openings for 2.3mm motor.

Any idea who can help. Willing to pay a fee for service. I have two adaptor for modification.
Appreciate if you can help



Cheers
Babylon5

[HZM]

Hi Babylon5,

Sometime back, while we flying easy glider, we had similar problem. We need to enlarge the prop adaptor hole from 3.2mm to 3.5mm.

Hand drill is possible and so far we do not face problem. Of cos lathe is most accurate.

Where do you stay? I can help you hook up one near yr place

Mike

[Babylon5]

help needed

Hi Babylon5,

Sometime back, while we flying easy glider, we had similar problem. We need to enlarge the prop adaptor hole from 3.2mm to 3.5mm.

Hand drill is possible and so far we do not face problem. Of cos lathe is most accurate.

Where do you stay? I can help you hook up one near yr place

Mike

Thanks Mike for offering your help.
Infact I really like this Rc group. There so many people offering me help including you when I posted the query.


There are two Rc friends who own lathe so are arranging to help me with the modification.

I stay in Bukit Panjang , Senja Road.
Use to fly at Bukit Batok RC Flying club.

Where do you stay ? Maybe can meet up one of this day and have a cup of coffee.

Here is little of what I do in R/C
I fly EDF plane nowadays. Either I DIY the plane or hack other plane and convert to EDF. Found EDF plane flies better than open prop set up.
Surprising , EDF do not guzzle so much ampere after you hv experiment and found a good match with motor and fan. My first proto flies pretty fast and well at only 11amps on 3 cells Lipo and weights 450grams with steerable landing gear.

The reason for enlarging the prop adaptor is part of a EDF project. The hole has to be balance and true because the shaft is spinning the edf impeller in excess of 30,000rpm


Cheers and thanks again

Babylon5

[HZM]

No problem babylon5, I am glad you can find help Nothing beats help pouring in when you need it

We will have chance to meet, singapore is pretty small

Cheers

Mike

[bb71]

part machining

Hi Alfie...

I can machine the parts you are looking for if you haven't found anyone yet. Let me know if you are still looking and we'll draw some quick plans up and get moving. Cost will be very reasonable.

You can email me at bender_brad@hotmail.com or contact me through the board. I have a lathe and a mill at my disposal.

Brad

[zhustar]

Thanks Mike for offering your help.
Infact I really like this Rc group. There so many people offering me help including you when I posted the query.

There are two Rc friends who own lathe so are arranging to help me with the modification.

I stay in Bukit Panjang , Senja Road.
Use to fly at Bukit Batok RC Flying club.

Where do you stay ? Maybe can meet up one of this day and have a cup of coffee.

Here is little of what I do in R/C
I fly EDF plane nowadays. Either I DIY the plane or hack other plane and convert to EDF. Found EDF plane flies better than open prop set up.
Surprising , EDF do not guzzle so much ampere after you hv experiment and found a good match with motor and fan. My first proto flies pretty fast and well at only 11amps on 3 cells Lipo and weights 450grams with steerable landing gear.

The reason for enlarging the prop adaptor is part of a EDF project. The hole has to be balance and true because the shaft is spinning the edf impeller in excess of 30,000rpm

Cheers and thanks again

Babylon5

Hello:

IF you need help with these parts I may be in a position to help you cos I have access to a fully equiped precision machine shop. Just send me a PM

[zhustar]

[QUOTE=zhustar]Hello:

Also my shop is located in Bukit Batok Industrial Estate. I am willing to machine /fabricates the parts for you based on part time basis ie the waiting time may be longer cos my daily job is more important than your parts. Incidentally I was one of the founding member of BBAFC

[Babylon5]

Hi Zhustar, sorry for the late reply, Once again thank you for your offer to help out.
A friend has offer to enlarge the prop adaptor for me.
I am glad to find so many RC and helpful friend in this forum.
I understand you are one of the founder at BBAFC.
Are you still active member?
BBAFC need more member so that the club can be maintained properly.

I hope you can join us especially in the evenings. I usually fly RC plane

Babylon5